1 . Graphite plate 2 . 0.8mm particle , Density > 1.72 3. No crack , perfect surface . 4. Advantage on big & thin

1 . Graphite plate

2 . 0.8mm particle , Density > 1.72

3.  No crack , perfect surface .

4.  Advantage on big & thin

Grade	GSK	TSK
Bulk Density	≥1.72  g/cm3	≥1.68  g/cm3
Particle Min(mm )	0.8	0.8
Ash	≤ 0.1   %	≤ 0.2  %
Specific Resistivity  (µ Ω ­ m)	8-9	8-9
Flexural Strength	≥14.5 Mpa	≥13  Mpa
Compressive Strength	≥32 Mpa	≥28 Mpa

 

Grade	GSK	TSK	PSK
Bulk Density	≥1.75  g/cm3	≥1.72  g/cm3	≥1.68  g/cm3
Particle Min(mm )	2	2	2
Ash	≤ 0.1   %	≤ 0.2  %	≤ 0.2  %
Specific Resistivity  (µ Ω ­ m)	8-9	8-9	8-9
Flexural Strength	≥16Mpa	≥15  Mpa	≥13  Mpa
Compressive Strength	≥35 Mpa	≥30 Mpa	≥28 Mpa

GRAPHITE MATERIAL:

Extruded Graphite,Molded Graphite,Isostatic Graphite,Vibration Graphite,High density and high Flexural Strength graphite material . (Die molded graphite),High pure extruded graphite,Special carburizing treatment graphite material

CHARACTERISTIC :

1. Characterized by high temperature resistance ,corrosion resistance, good thermal shock resistance ,good electric conductivity ,thermal conductivity, and also featured by strong mechanical strength at high temperature and low coefficient of thermal expansion.

2. Many kinds of different sizes , wear durable , and high temperature

3.We have big advantage on cutting the graphite plate , with low cost and good surface .

APPLICATIONS:

They have been used extensively in industries like solar, foundry, chemicals, electronics, ferrous metals, high-temp, heat conduction, metallurgy, lubrication, anti-corrosion .etc

1. Refractory material: widely used in the metallurgical industry.

2. Conducting material: In the electronics industry, widely used for graphite electrode, brush,, etc

3. Wear-resisting material and lubricant: Use graphite as wear-resisting and lubrication materials, can be 100m/s speed sliding in - 200 ~ 2000 °C temperature range , no or less lubricanting oil.

4. Sealing material: it can be as sealing ring in the equipment, such as centrifugal pump, hydraulic turbine ,etc.

5. Anticorrosion material: Widely used in petroleum, chemical, hydrometallurgy departments.

6. Insulation, high temperature resistant, radiation protection materials

7.Molds:  hot pressing molds, static casting molds, centrifugal casting molds, pressure  casting molds, fused refractory molds, etc.

8. Furnace parts:  resistance heating elements, induction susceptors, structural elements and charging plates, furnace linings, heat shields and covers for pulling monocrystalline silicon or optical fibers, etc.

9. Anodes for the electrolysis of metals. As graphite elecerode plate and graphite anode plate .

10. Parts for heat exchangers.

11. Mahince to Crucibles for melting and reduction. Boats and trays for sintering.

 

High quality extruded graphite sheet