Welcome to ECVERY
Heavy Duty Cordless Grease Gun
Heavy Duty Cordless Grease Gun
Supplier Info
[China Supplier]
Contact Person : Mr. Zhang QiZhou
Tel : 0086-574-87317723
Fax : 0086-574-87405595
Product Detail
Heavy Duty Cordless Grease Gun Max Operating Pressure: 9.500 PSI (500 psi tolerance) Minimum Flow Rate: 75 g / Min. Heavy Duty Cordless Grease GunContinuous pumping of grease with the powerful 18V electric motor Maximum Operating Pressure: 9.500 PSI (500 psi tolerance) Battery Capacity: 1.500 mAh Battery Load Time: 1 h High Pressure Hose: 42'' Grease Reservoir Capacity: 14.5 oz. Total Weight: 18.4 lbs

The cordless grease gun complete set from Fritsche, consisting of highly competitive 18V grease gun with battery, 240V one-hour quick battery charger, as well as 42'' high-pressure hose with bend protection feather. It comes in a tough, push-firm and dirt-repelling case of form-pressed plastic.With the Cordless Grease Gun from FritscheThe Power is in Your Hands.Technical data:Cordless grease gun:

Filling Options: 400 g grease-cartridge or 500cc of loose grease Delivery Rate: 75 g / Min. Working pressure: 6.000 PSI (500 PSI tolerance) Maximum operating pressure: 9.500 PSI (500 PSI tolerance)

Battery:

Working Voltage: 18 V Capacity: 1.500 mA/h

Charger:

Primary voltage: 240 V, 50 Hz, 38 W Secondary voltage: 18V, 1.400 mA Charging Time: 1 hour

Total weight with equipment and case: 18.4 lbs 

Specification of the Cordless Grease Gun: 

Complete cordless - no more tangling or tugging hoses or cords With very strong high-performance 18 V electric motor, up to 10.000 PSI. With 42'' flexible high-pressure hose. Perfect for hardly accessible areas. With electronically steered quick battery charger (240 V), LED-controlling light and 2 m of connecting lead. With two highly competitive batteries NiMH 18 V, longer lasting and more ecologically friendly than NiCd. Charging time = one hour With 4 jaw hydraulic gripper nozzle. With ergonomically balanced design to minimize operator strain. With stable, practical carrying case. With robust carrying strap for an easy, strength-saving application. The mobility at the work is raised. With a bleed air valve to the prevention of air in the cordless grease gun. With integrated pressure limitation valve. With 18V spare battery. From now on unnecessary delays have an end.

Special features:

The cordless grease gun of Fritsche processes fat to class NLGI 2. Form cuff with thick fit with loose fat or cartouches. Separate opening for installation of he filling valve. Sure handle in the push pole. Stable construction. Professional solution for the greasing of individual lubrication points Easy to use and provides unrestricted mobility.

Charger OperationCharging the battery pack general:Before using the cordless grease gun for the fist time, if the battery pack is installed in the gun, remove it by depressing the two battery release buttons (one button on each side of battery pack) and pull the battery pack out of the cordless grease gun.As a battery pack approaches the discharged state, you will notice a sharp drop in tool performance. When the tool is unable to perform the task at hand, it is time to recharge the battery pack. Recharging the battery pack before this condition is reached will reduce the total work life of the pack. Discharging the pack beyond this point can damage the pack.Start the charging process by inserting the battery pack into the charging Socket of the charger. Then, plug the charger into the nearest 240 volt, grounded, electrical outlet. To start charging, press the "Set" button on the charger. The battery is charging when the green light illuminates.After termination of the charging (approx. 1-2h), the red light illuminates. Pull the charger out of the socket and remove the battery.Installing or removing the battery pack:Depress the two battery release buttons (one button on each side of battery pack) and pull the battery pack out of cordless grease gun.Note: Make sure the power circuit voltage is the same as that shown on the charger specification plate!Note: The battery temperature will increase during and shortly after use. Batteries may not accept a full charge if they are charged immediately after use. Allow the battery pack to cool to room temperature before charging for best results.How to install a Grease Cartridge in the Cordless Grease GunRemoving Empty Grease Cartridge

Pull back on the follower handle until the follower rod is fully extended and latch the follower rod groove into the slot on the tube end cap of the Grease Tube. Unscrew the grease tube assemble from the cordless grease gun. Carefully release the follower handle to eject the empty cartridge from the container tube.

Installing Grease Cartridge

Remove the plastic cap from the grease cartridge and insert the cartridge into the container tube. Remove the pull tab from the grease cartridge and screw the grease tube into the pump assembly. Release the follower rod from the slot to allow it to go forward. Purge air from the pump. See air purging instructions.

To convert gun to allow filling from bulk container or filler pump

Unscrew the grease tube assembly cap from the grease tube assembly. Pull on the follower handle to extract the follower and spring from the grease tube assembly. Grasp the follower between thumb and forefinger and flip the follower lip from the rear to the front side. Note: The follower resembles a cup. When the gun is assembled for use with bulk lubricant, the cup opens toward the pump assembly. Reassemble the follower into the grease tube assembly and position it with the follower handle so that the grease tube assembly cap can be tightened onto the container tube.

To fill the cordless grease gun from bulk container

Remove grease tube from the cordless grease gun. Insert the open end of the grease tube assembly into the lubricant. Slowly pull the follower handle back while pushing the grease tube assembly deeper into the lubricant to prevent air pockets from being pulled into the grease tube assembly. When the follower rod is fully extended, pull it sideways to latch the rod groove into the keyhole slot in the grease tube assembly cap. Turn the grease tube into the cordless grease gun and release the follower rod from the slot on the end cap of the tube to allow the follower rod to go forward. Clean any excess grease of the gun body.

Heavy Duty Cordless Grease Gun

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.