Welcome to ECVERY
Micron sand mill
Micron sand mill
Supplier Info
[China Supplier]
Contact Person : Mr. Wu Henry
Tel : 0086-21-59124234
Fax : 0086-21-59123133
Product Detail
bead ginder Automobile paint and its repairing paint CE: ISO 9001:2000 Color paste for water printing Blank carbon for texti

All the Type: 

Type

Volume

Power

Bead size (mm)

Body size (mm)

PUMP

Electric

WSZ-9.8

9.8L

22kw

0.8-1.5

970x700x1596

Air/gear pump

PLC/Nor/Ex

WSZ-11

11L

22kw

0.8-1.5

970x700x1800

Air/gear pump

PLC/Nor/Ex

WSZ-14

14L

30kw

0.8-1.5

1500x780x1583

Air/gear pump

PLC/Nor/Ex

Features:

  Double cone type grinding chamber, the material can realize circular grinding capacity, super wear-resistant rotor, stator bar and nail.

  Previous equipment often mechanical seal leakage, leading to leakage of materials to the bearings, and the upper belt wheel, causing damage to bearings, mechanical seal damage and other issues, to the enterprise caused huge losses.

  In order to solve the problem, our company in recent years developed the world's first, has patented SXHL - spiral sealing system to replace the mechanical seal, by mechanical and physical structure blocking material, solution of mechanical seal leakage problem of thick, and in all parts of the world have been proved ( Brazil is the largest market this kind of such equipment ) without the need for mechanical seal structure for the production of ink, paint production enterprises brought a lot of convenience, simple structure, Don't need of maintenance,cooling lubricating oil and gas. Don't worry about the lubricating oil into the material losses.

This equipemtn adopts the principle of slot type milling,so the separate milling power is strong.And this strong searing and stressing can not be done by normal sand mills.So it is quite suitable to mill the coating and ink such as black carbon,iron oxide which is difficult to separte and whose fineness requirement is high.The milling chamber of bipyramid slot type has the advantages of highly efficient milling result,low consumption of abrasive medium,less residue in the cylinder,low cost for application.Even if the hot weather in the South,the advanced double internal water cooling system with even the tap water can reach the satisfactory cooling result.The manual hydraulic system of the grinding cylinder makes it easy to disassemble and clean the cylinder very conveniently.The main engine adopts frequency speed regulating and soft starting.So clients can choose relevant speed according to different material to reach the dual effect of energy economy and good milling.The key technology of this cylinder is adopting the highly wear-resistant alloy which has solved the problem of material pollution caused by the sand mill and the inner layer can be replaced.

Micron sand mill

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.