Ads by Google
| Manual Surface Grinder | |||
| GMD:Manual transmissions on X,Y,Z axes | |||
| GMD A:Electric transmissions on X,Y axes; manual transmission on Z axis | |||
| GMD B:Hydraulic transmission on X axis, electric transmissions on Y axis, manual transmission on Z axis | |||
| GMD C:Hydraulic transmission on X axis,electric transmissions on Y,Z axes | |||
| Model | Units | GMD 300C | |
| Table Size (L×W) | mm | 600×300 | |
| Max. size to be Ground( L×W) | mm | 630×310 | |
| Number of T -Slot | mm | 1×14 | |
| Distance From Table Surface To Spindle Center | mm | 530 | |
| Wheel Size (dia.×width×bore ) | mm | 250×25.4×76.2 | |
| Spindle Speeds | r/min | 1450 | |
| Cross Feed on Table | Auto feed | mm/min | 0.1~7.5 |
| Rapid speed | mm/min | 50~500 | |
| Feed of handwheel | mm | 0.02/div2.5/rev | |
| Vertical Feed On Handwheel | mm | 0.01/div 2/rev | |
| Longitudinal Speed of Table | m/min | 3-20 | |
| Spindle Motor | kw | 2.2 | |
| Cooling Motor | w | 40 | |
| Hydraulic Motor | kw | 2.2 | |
| Working Pressure | Mpa | 4 | |
| Gross/Net weight | kg | 1430/1300 | |
| Machine Size (L×W×H) | mm | 1960×1480×1850 | |
| Packing Size (L×W×H) | mm | 1960×1640×2020 | |
| Item NO. | 121214 | ||
| Standard accessories | |||
| Tool box | |||
| Balance stand and balance bar | |||
| flange wrench | |||
| screw drive | |||
| Balance screw | |||
| open-end wrench | |||
| hexagonsocket wrench | |||
| wheel dresser | |||
| diamond | |||
| Mechine cushions | |||
| wheel balancing device | |||
| chuck | |||
Manual Surface Grinder