1. BR6MB Parameter of unit
Standard | GB16409-1996 | Design pressure (MPa) | 1.0/1.6/2.5 | |
Design temperture() | NBR | -20~110 | Test pressure (MPa) | 1.3/2.1/3.25 |
EPDM | -50~150 | Maximun surface area of unit() | 18 | |
FTP | -20~180 | Maximun flow rate(m3) | 56 | |
F26(FPM) | -55~230 | Jonit pipe (mm) | DN50 |
2.Main parameter of plate
Size of external form(mm) | 746×248 | Corrugating deepness(mm) | 2.9 |
Diameter of corner hole of plate (mm) | φ60 | Hydraulic diameter | 5.8 |
Centure distance of corner hole of plate | 641×140 | Corrugating figure | figure |
Thickness of plate | 0.5/0.6 | angle | B=126° |
3.Material of plate
Stainless:SUS304 304L 321 316 316L etc
Industrical pure titanium:Tai-A
Other alloy:Hastelloyc-276 SMO254 Ni etc
4.Gasket material
NBR EPDM TP F26(FPM)
Plate Heat Exchanger