Ads by Google
OTF1200X-60UV is CE certified 60mm dia. Ni based super-alloy tube furnace with CF flange and KF25 adaptor for ultra- high vacuum application upto 10^-6 torr and 1200°C. Precision temperature controller can provide 30 segments programmable profile with +/- 1°C accuracy. The furnace also can be used under high pressure upto 20 atm both in oxygen and inert gas.
Specifications:
| Furnace casing | Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C.High purity fibrous alumina insulation for Max. energy saving. |
| Power | 3.0 KW Max. ( 20A breaker required) |
| Voltage | AC 208-240 Single Phase, 50/60 Hz |
| Max. Temperature | 1100°C ( < 1 hour ) |
| Continuous Temperature | 1000°C |
| Max. Heating Rate | <= 30°C /min |
| Processing Tube | Material: Nickel based super-alloy seamless tube with max. 1200°C working temperature Tube Size: OD 60 x ID 52 x Length 1000 (mm) |
| Heating Zone length | 440 mm ( single zone ) |
| Constant temperature zone | 150 mm (+/-1°C) |
| Temperature controller | PID automatic control with 30 steps programmable Automatic ver-temperature and thermal broken protection |
| Temperature Accuracy | +/ - 1°C |
Vacuum Sealing & Connection | Two sets of CF-63 flanges are included in the standard package:High Vacuum CF-63 Flange: KF40 vacuum pump connector, KF25 vacuum pressure senser connector, right-angle vacuum valves and one meter long SS bellows are installed in one side flange for connecting to vacuum pump. (for use under high pressure only )High Pressure CF-63 Flange: 1/4" swagelok connector and SS needle valve are installed in another flange for gas flow. (for use under high pressure) |
| Pressure limited | Under High Pressure: Warning: Must limit working temperature under a certain positive pressure limited by vessel material strength 800 PSI max at 800°C (50 bar)300 PSI max. at 1000°C (20 bar)130 PSI max. at 1100°C (9 bar )Never heat up vessel above 1200oCUnder high vacuum1E-2 torr by a mechanical pump5E-6 torr by a compact molecular pumpPlease order vacuump pump by click picture below at extra cost. |
| Heating Element | Fe-Cr-Al Alloy doped by Mo |
Split Tube Furnace with 60mm Ni-Based Superalloy Tube for 10E-6 Torr High Vacuum and 300 PSI High Pressure