Ads by Google
Hedge trimmer
It has advanced engine, chrome plated cylinders, intensified crankshaft, long service life.
Advantage:
1. Knife is made of high-quality steel, strong and durable.
2. Gearbox-coaxial axis technology avoid many stoppage.
3. Revolutionary- green engine.
4. Technical character- Possessing a speed blades gap adjusting device, permit to adjust steplessly the blades gap.
5. Economy - Low oil consumption, reduce fuel consumption 20%.
6. Environmental Nature-reduce pollution 30%, modeling concise and lively, compact structure, operation special flexible, especially suitable to the small area and complex of the lawn or lawn with flower.
Specification:
1. Machine powder- 1E32F
2. Engine- air-cooled two-stroke gasoline engine
3. The ratio of fuel mixture is 25: 1.
4. Engine displacement: 22.5 cc
5. Engine idling: 2600 r/min
6. Fuel volume: 600 ml
7. Power: 0.65 KW / 750 RPM
8. Cut area: 600 mm
9. Net weight [Engine]: 2.8 kg
10. Net weight [machine]: 6kg
11. Carry type: portable
12. Scissors: single blade, two blades, reciprocating
Operating instructions:
8.0.1 Put the petrol in. Switched off the motor, put the mixture of lead-free petrol (the 2 stroke machine) and oil with volume ratio: 25:1 in tank.
8.0.2. Start
8.0.2-1 turn the switch at “ON”
8.0.2-2 move oil valve until the oil spill in the over flow pipe.
8.0.2-2 pull starter rope
8.0.3 move jam stem on middle position, let the engine idling for 3 to 5 minutes
8.0.4. move jam stem at “ON”, hold oil valve, then off suddenly, make the lock open. So engine works as fixed rotate speed.
8.0.5 Keep smooth tidy and the height consistent when work. Tilt machine 5°-10° to work easily.
8.0.6 Keep body in the carburetor side, never allow in exhaust pipe side, to avoid the waste gas burns.
8.0.7. adjust the speed according to demand, it’s unnecessary to keep speed too high.
8.0.8 when finish work, close the throttle, clean enclosure, store.
New Generation Hedge trimmer