Welcome to ECVERY
Work Well Electric Wire Rope Hoist For Gantry Crane,Overhead crane
Work Well Electric Wire Rope Hoist For Gantry Crane,Overhead crane
Supplier Info
[China Supplier]
Contact Person : Mr. Cai Chris
Tel : 0086-373-3055523
Fax : 0086-373-3384608
Product Detail
1.Single speed,double speedd,strong structure 2.Using for gantry crane , overhead crane or H-beam 3.Best service and warranty

      Work Well  Electric Wire Rope Hoist  For Gantry Crane,Overhead crane  Introduction:

CD1 type wirerope electric hoist as lifting machnine is a kind of light-duty lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. Conic rotor brake motors are equipped which has safety limiter in both up and down directions.

CD1 type wirerope electric hoist as lifting machnine can be widely used to electric hoist heavy objects, or installed on the straight or curve I-section steel beam of single beam cranes. They can also be used together with Electric Hoist Double beam gantry cranes and jib cranes. All the above has made the electric hoist common in industrial and ore enterprises, railway, wharfs and warehoues. 


Motor: electric hoist  as lifting machnine  Motor is a squirrel cage taper type rotor motor with braking, it is made by Nanjing special motor factory, it is the best quality motor, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.

Wire Rope: electric hoist ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope, is six.

Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.

Electric apparatus controlling system: Model CD1 and MD1 electric hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.

Technical Parameter:



CD and MD


Rated load capacity (T)

0.5, 1, 2,3, 5, 10,16, 20 ton


Rated span (m)



lifting height (m)

6, 9, 12, 18, 24, 30


Work dury

A3 andA4


Control way

Pendent line control or remote control or both



Squirrelcage rotor motor

Nanjing Special brand(No.1 in China)


Power supply

380V 50hz 3phs

(or according to your demand)


Main hook lifting speed (m/min)

8/0.8m/min, 7/0.7m/min, 3.5/0.35m/min


Trolley travelling speed (m/min)



I beam model



Min. rotate radius


The techinacl parameter is for your reference ,if you want to order the hoist , pls tell the following data:

1. the capacity

2. the lifting height

4. the industrial voltage in your country

5. the other special demand

We sincerely invite you visit our factory!

Electric wire rope hoist picture with different color:


 Foreign Clients for wire rope hoist:

Spare parts for wirerope electric hoist:

Work Well Electric Wire Rope Hoist For Gantry Crane,Overhead crane

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.