1.Reliable longtime operation 2.Maintenance-free design 3.No mounting tools required 4.Control room temperature thermostat

SEH30.....Electric Actuator

Introduction

The SEH30.xx can be used with electrical on/off-controls to activate several types of valves and floor heating manifolds, the actuator is made for either 24v or 230v supply om normally closed. 

Application

For the on/off control of water flow in water-based floor heating systems as zone valve used in Commercial buildings, Residential building, Light industrial buildings

Features

It equips a synchronous motor and gear mechanismReliable longtime operationMaintenance-free designNo mounting tools requiredLED position indicator on actuatorSingle signal line for all kinds of thermostatsNo power consumption in end position

Technical Data

Voltage AC230V(AC110V / AC24V Availabel)

Power Consumption 2W

Force 110N

Stroke 3mm

Running time : Opem 3mins. Close 5mins

Valve interface Cap nut M3×1.5mm

Ambient temperature -5°c~60°c

Cable Length 900mm

Housing material Anti-flammable ABS

Protective Housing IP54

Mounting Position Upright up to 90°

 

SELECTION TABLE
MODELS	VOLTAGE	VALVE ACTION	LOADING(PC / CARTON)
SEH30.23	230V	valve closed without current	60
SEH30.24	24V	Valve closed withou current	60

Valve compatibel to SEA:

 

VEI46.... (2-way)and VSI46.....(3-way)

24v electric floor heating actuator