Programmable or Non-programmable Bacnet communication thermostat Digital room thermostat For HVAC system

Power supply	24 Volt AC±20%  50/60HZ
Power consume	≤ 1W
Electrical rating	1 amp maximum load per terminal
Sensor	NTC  5K @25
Temperature degree	Celsius or Fahrenheit
Temperature control range (for heat/ cool)	5~35 (41~95)
Accuracy	±0.5 (±1) @25
Temperature differential	Two temperature differentials setting for each cooling/heating stage
Stages	Up to 2 stages cooling/ 2 stages heating
Programmability	Program 7 days up to four time periods and temperature set points for each day
Cool/heat Changeover	Auto changeover or Manual switch selectable by end users
Keys	On the surface: power/ increase/ decrease key Inside: programming keys
Net weight	300g
Dimensions	110mm(L)×90mm(W)×25mm(H)
Mounting standard	Mounting on the wall, 2×4or 65mm×65mm box
Housing	PC/ABS plastic material with IP30 protection class
Approval	CE

      

1.BacNet thermostat is typical used in buildings for single zone rooftop units,  split systems, heat pumps or hot/chilled water systems.

2.Designed to provide exceptional temperature control of single & multistage heating and cooling equipment required to reside on BACnet MS/TP networks.

3.A PIC statement is supplied to be easily mapped back to a graphical user interface.

4.Self configuring / adjustable baud-rate senses the communication conditions of the current MS/TP network and match them.

5.BACnet PIC statement provided to further facilitate integration.

6.Pre-configured control sequences and rich parameters selectable to meet most applications

7.All setup are permanently held in non-volatile memory in the event of a power failure.

8.Attractive turn-cover design, most frequently used  keys are located on the face for quick and easy  access to information. Setup keypads are located on the interior to eliminate accidental setting changes.

9.Large LCD display with enough information for quick and easy readability and operation. Such as  measurement and setting temperature, fan and compressor work status, clock and timer etc.

10.Automatic compressor short cycle protection  

11.Auto or manual fan operation.

12.Auto or manual heat/cool changeover.

13.Include a timer with the auto turning-off

14.Temperature either °F or °C display

15.Set point may be locked out /limited locally or via the network

16.Infrared remote control optional

17.Backlight of LCD optional

BACnet Thermostat