Ads by Google
Product Features:1.Applied range:sanitary hot water,heating,cooling.2.Enhanced vapor injection compressor,Ambient condition:-25~43 C.3.Five modes: Hot water;Heating;Cooling;Heating + Hot water;Cooling + Hot water.4.In summer,On the cooling+hot water model,unit will be cooling,or hot water,or two at the same time automatically.5.In winter,On the heating+hot water model,unit will be heating,or hot water,or two at the same time automatically.6.Heat recovery technology,get free sanitary hot water when cooling.7.Three heat exchangers. The sanitary hot water and the heating (cooling) water is completely separated.8.Eco-friendly refrigerant: R407C .9.Two speed fan motor:further improve unit operation(hot water model)under high ambient temperature.10.Expansion valve regulates the flow of refrigerant precisely.11.Galvanized plate shell, powder coating.12.LCD display wire controller.13.Can set the operating time freely. 14.Unit runs or stop automatically according to water temperature.15.Compatibility of indoor signal control(10~12V).16.Can control the auxiliary heating (e.g. electric heating).17.With hot water return control, to keep the water warm in supplying pipe.18.Water flow protection control.19.Automatic prevent freezing in the winter.20.Automatic defrosting.21.Failure diagnosing function.22.Modular design,units combine freely.
Specifications:
| Model | KS-24J2P | ||
| Power supply(V/Ph/Hz) | 380-415/3/50 | ||
| Hot water model | Heating capacity | kW | 35 |
| Rated power input | kW | 8.2 | |
| COP | 4.3 | ||
| Hot water output | L/h | 750 | |
| Hot water temperature | °C | 20~60 | |
| Floor heating model | Heating capacity | kW | 30 |
| Rated power input | kW | 7.6 | |
| COP | 3.9 | ||
| Fan coil heating model | Heating capacity | kW | 30.0 |
| Rated power input | kW | 9.00 | |
| COP | 3.3 | ||
| Cooling mode | Cooling capacity | kW | 24 |
| Heat recovery capacity | kW | 28.0 | |
| Rated input power | kW | 8.0 | |
| EER | 6.5 | ||
| Circulating water flow | Hot water | m3/h | 6.6 |
| Heating/Cooling | 5.7 | ||
| Water resistance | Hot water side | kPa | ≤40 |
| Heating/cooling side | ≤25 | ||
| Compressor type | EVI Scroll | ||
| Refrigerant | R407C | ||
| Noise | dB(A) | 64 | |
| Net weight | kg | 340 | |
| Unit dimensions | mm | 1390×740×1640 | |
| Packing dimensions | mm | 1490×790×1800 | |
| Stacking layers | layer | 1 | |
| Water pipe connector | mm | DN40(1-1/2") | |
| Ambient condition | °C | -25~43 | |
| 1)Water heater rated test conditions: Ambient temp.(DB/WB): 20°C/15°C,Initial water temp. 15°C,temp. rise of 40°C.2)Floor heating rated test conditions:Ambient temp.(DB/WB): 7°C/6°C,Water temp.(Inlet/Outlet):30°C/35°C.3)AC heating rated test conditions:Ambient temp.(DB/WB): 7°C/6°C,Water temp.(Inlet/Outlet):40°C/45°C.4)AC cooling rated test conditions:Ambient temp.(DB/WB): 35°C/24°C,Water temp.(Inlet/Outlet):12°C/7°C. Heat recovery water temp.(Inlet/Outlet):40°C/45°C. | |||
| Remarks:Fexible range with other refrigerants (e.g. R22), other various power supply available according to the client's requirement. | |||
Low ambient temperature EVI air to water (air source) heat pump three in one unit(HVAC central air conditioner 24kW)