Mechanical Hygrostat MFR 012
The electromechanical hygrostat MRF 012 is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion is effectively prevented.
Technical Data
Switch difference | 4%RH (±3% tolerance) |
Permissible air velocity | 15M/sec |
Contact type | change-over contact |
Contact resistance | 10M O |
Service life | 100,000 cycles |
Min. Switching capacity | 20V AC/DC, 100Ma |
Max. Switching capacity
| 250VAC, 5(1)A DC20W |
EMC | acc.to EN55014-1-2, EN61000-3-2, EN61000-3-3 |
Connection
| 3-pole terminal for 2.5m rigid wire 2.5mm2 stranded wire ( with wire end ferrule)1.5mm2 |
Mounting | clip for 35mm DIN rail,EN50022 |
Casing | Plastic according to UL 94V-0 ,light grey |
Dimension | 67x50x38mm |
Weight | approx.60g |
Fitting Position | variable |
Operating/Storage temperature | 0o+60(32to+140F)/-20to+80(-4to+176) |
Protection type | IP20 |
Art.no | Setting range |
01220.0-00 | 30to95%RH |
MFR 012 Mechanical Stego Hygrostat