Welcome to ECVERY
FD Hydraulic Brake System for Wind Power
FD Hydraulic Brake System for Wind Power
Supplier Info
[China Supplier]
Contact Person : Mr. Chen David
Tel : 0086-28-61836262
Fax : 0086-28-61836323
Product Detail
1. Hydraulic brake for wind power:Flow=1.6L/min; 16L/min 2. Motor rate:1500kw 3. Oil medium:VG32-46

1.Application

   Our hydraulic system mainly used for the drive of braking and yawing system of wind turbine. by which to make sure the system work normally according to requirement. The oil medium:VG32-46. 2. Operating principle

   According to the control requirement, Wind turbine hydraulic system consists of following module: oil supply module, main shaft braking module, yawing braking module, yawing drive module, blade tip braking module.

   Oil supply module uses accumulator loop and consists of oil lank,Pump unit liter,accumulator, safety cell We provide various specification of hydraulic system based on system function and installation space. from 6L 10L. 20L to 30L The pressure of system and accumulator is built when oil supply module is activated The hydraulic pump shut down once the system pressure over the maximum set value then the accumulator will supply the pressure for system.

   The hydraulic pump activated again to charge the accumulator once the system drop to the minimum set value There are filter and safety oil inside the system to prevent damage caused by overpressure. 

  

  

FD Hydraulic Brake System for Wind Power

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.