Hose Crimping MachineHose Crimping Machine features:
1.small and portable appearance,
2.big force, low noise and easy to operate.
3.The buckling amount can be precise adjusted through a scale.
4.It makes themould base division to be more even through the double inclined plane eight-flap
5.mould seat equipped with a high accuracy guiding device.
Hose Crimping Machine Application:
mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering.
It can also be used fo rbuckling the two-way bends, especially large bends and irregular shape bends.
Hose Crimping Machine Technical Feature:
Buckling range | Φ6—Φ51mm |
Max. buckling force | 400T |
Scale accuracy | 0.02mm |
Rated pressure | 31.5 MPa |
Oil pump displacement | 5ml/rad (380V); |
Optional Oil pump displacement | 2.5ml/rad (220V) |
No. of standard die set | 10 sets |
Overall dimensions | 670(L)×490(W)×780(H)mm |
Hose Crimping Machine Notices:
1. When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled
on the hex nut.
2. Prevent tool and other foreign matter from entering the locking head.
3. After the work is finished for each time, the eight-block mould base must be made to extend to the
greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
4. When working, the hand should not stretch into the locking head.
5. The power supply must be switched off when maintenance is done.
Hose Crimping Machine purchase information:
1) Packing: As customer's Requirement
2) Payment: By T/T, 30% deposit, 70% balance paid after copy of B/L, total by USD currency
3) Delivery: Within 30 days after we have received the advanced payment.
Hose Crimping Machine