Welcome to ECVERY
F2164 GPRS RTU (Remote Terminal Unit)
F2164 GPRS RTU (Remote Terminal Unit)
Supplier Info
[China Supplier]
Contact Person : Mr. Jiang Nick
Tel : 86-592-5907276
Fax : 86-592-5912735
Product Detail
RTU: 1. 4 relay outputs (5A/30VDC,5A/250VAC) 2. Support RS232/RS485 MODBUS RTU protocol 3. Support RTU extended protocol

RTU

F2164 GPRS RTU is a wireless Remote Terminal Unit(abbreviation: RTU).It has multiple functions (analog input,relay output,digital input,digital output,pulse counting and wireless data communication, etc).

It adopts high-powered industrial 32 bits MCU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port which can conveniently and transparently connect devices to a cellular network, Easy to make your existing devices connect to network just with  basic configurations. It has low power consumption work mode in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output functions. 

It has been widely used in M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

Product Feature

Design for Industrial Application

u High-powered industrial cellular module

u High-powered industrial 32 bits MCU

u Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest

u Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function

u Housing: iron, providing IP30 protection.

u Power range: DC 5~35V

Stability and Reliability

u Support hardware and software WDT

u Support auto recovery mechanism, including online detection, auto redial when offline to make it always online 

u RS232/RS485/RS422 port: 15KV ESD protection

u SIM/UIM port: 15KV ESD protection

u Power port: reverse-voltage and overvoltage protection

u Antenna port: lightning protection(optional)

Standard and Convenient

u Adopt terminal block interface, convenient for industrial applications

u Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly

u TTL logic level RS232 interface can be customized

u Support intellectual mode, enter into communication state automatically when powered on

u Provide management software for remote management

u Support several work modes

u Convenient configuration and maintenance interface

High-performance

u 8 analog input channels(resolution:16bit)Input voltage(0-5V),Input current(0-20mA), Sampling rate(1.365kSPS).

u 4 relay outputs(5A/30VDC,5A/250VAC).

u 4  optocoupler isolated outputs(10mA).

u 8 Digital inputs(Voltage range:3.3V-24V). one of these input port can be configured as pulse counter function. 

u 2MB SPI FLASH for data log.

u Support dual data centers, one main and another as backup

u Support multiple data centers , it can support  maximum 5 data centers

u Support multi-center multi-function(for example: one data center is MODBUS RTU protocol function, another data center is RTU extended protocol function)

u Support multiple online trigger ways, including SMS, ring and data. Support link disconnection when timeout

u Support dynamic domain name(DDNS) and IP access to the data center

u Support RS232/RS485 MODBUS RTU protocol.

u Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to virtual serial port.

u Support 8 digital inputs and 8 analog input manual query and automatic report.

u Support 4 optocoupler isolated output ports and 4  relay outputs controlled via MODBUS RTU protocol.

u Support pulse counter initiate value configurable, Its realtime value can be queried via MODBUS RTU protocol

u Support RTU extended protocol. 

u Acquisition data(8 analog inputs and 8 digital inputs) is reported periodically via RTU extended RTU protocal. 

u Support RTU extended protocol. Reporting mode can be selected. there are three reporting mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when network connect fail)

u Support RTU extended protocol.When reporting acquisition data failure, acquisition data are saved to 2M byte SPI FALSH.

u Support RTU extended protocol. The data center can query acquisition data actively

u Support RTU extended protocol. It has counter function that the initial value of the timer is set and the value of the timer is queried

u Support RTU extended protocol. It has the data center and RS232/RS485 transparent transmission function.

u Support RTU extended protocol. it has alarm function, alarm information is reported automatically(alarm trigger conditions can be configured independently).

u Support RTU extended protocol. Can remotely reboot RTU

u Support RTU extended protocol. Can remotely configure the parameters

u Support RTU extended protocol. The remote upgrading parameters can be configured, RTU support remote upgrade firmware.

u Alarm function: Alarm information are reported through RTU extended protocol , SMS, or both SMS and RTU extended protocol

F2164 GPRS RTU (Remote Terminal Unit)

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.