Ads by Google
Working principle of direct-hot blast heater
The direct-hot blast heater, is mainly made of three parts, such as furnace hearth, setting pocket and mixing room
The temperature is very high in the space between the setting pocket and the mixing room, to make the volatile combustible air burn sufficiently
The fuel is filled in by the furnace door, which forms burning layers on the grate
The air needed for combustion enters from the ashpit, through the grate and burning layers to make fuel burn sufficiently
Ash slags drop into the ashbin and discharged out of the ashpit
The combustion products (flue gas) in the chamber, through burning room, divided into ash and fire sparks by the setting pocket, then enters the mixing room, and pressed into the hot air room of the dryer after have been mixed with cold air to reach the temperature required
Auxiliary air gets preheated and enters the chamber to make the unburnt volatile and small carbon granules burn further
In order that the slags and sparks are not carried away by cold air, the cold air inlet is set behind the setting pocket and spark quenching device and higher than setting pocket
When fire is made in the chamber, the coal smoke produced enters the chimney by the passage and exhaust into the space
At the same time, when the dryer closes down or goes wrong, the flue gas can also be led out from the chimney
The temperature of the hot air can be adjusted by cold air door or hot air door
Technologic specification of direct-hot blast heater
Model | Temp.(°C) | Fan model | Weight(T) | Coal consumption (kg/t/h) | Heat value (Kcal) |
1.3*1.5m | 600-800 | Y5-47-7c | 7.5t | 15 | 1,000,000-1,200,000 |
1.2*1.4m | 500-650 | Y5-47-6c | 7t | 15 | 800,000-1,000,000 |
1.0*1.2m | 400-500 | Y5-47-6c | 6t | 15 | 700,000-800,000 |
0.8*1.0m | 300-400 | Y5-47-5c | 5t | 15 | 600,000 |
direct-hot blast heater, cowper stove, hot blast heater
ISO9001:2008 approved Direct-hot blast heater