Welcome to ECVERY
8T Electric Induction Furnace
8T Electric Induction Furnace
Supplier Info
[China Supplier]
Contact Person : Ms. Huang Cindy
Tel : 86-21-63090848
Fax : 86-21-63090548
Product Detail
Electric Induction Furnace 1 durableaasafe reliable 2 easy start up(zero start) 3 low power consumption 4 easy operation

8T Electric Induction Furnace

 I. Working Principles and Main technical parameters

ITEMGW-8-5000/0.5J
Rated Power5000 KW
Named capacity of the furnace8 T
Input Voltage and Power Frequency950V,50HZ 12 Pulse
Working Voltage3400 V
Working Frequency500 HZ
Speed of the melting (steel)7`8 T/H
Operation temperature1600 °C
Operation pressure of the cooling water0.25 ~ 0.3
Energy consumption600/550 Kw.h/t
Quantity of the power source phase3(Φ) phase
Quantity of the furnace phasesingle(Φ) phase
  II.operating conditions:

(1)   Ambient temperature: +5°C ~ 40°C; 

(2)   Relative humidity shall not exceed 90% (25°C); 

(3)   Altitude shall not 1,000m; 

(4)   Free of conductive dust, explosive gas and corrosive gas around the furnace; 

(5)   No evident vibration or bumps; 

(6)   Inlet water temperature: +5°C ~35°C; water quality: hardness shall not exceed 10-degree; total solid content shall not exceed 300mg/L, PH: 7-8.5;  

(7)   3-phase power-supply voltage fluctuation shall not exceed ± 5%.

III.Electrical Feature: 1. Digital CMOS chip (U. S. ASIC-2-12), with the highest degree of integration at home, is used in control circuit, the overall machine controlled through one single panel. 2. Frequency-sweep zero voltage start, high success rate, no shock; 3. Automatic resistance adjustment, permanent power output, 10-20% energy saved  in comparison with domestic traditional machine of the type; 4. Auto phase sequence adaptation, free of synchronization; 5. Good performance in reload staring, auto recovery; 6. Highly integrated in controlling circuit, free of use of high-rate starter and relay loop, fairly low failure rate; 7. Wholly digital design, strong in anti-interference, no temperature shift when in continuous working; 8. Multi-protection functions (for over current, over voltage, insufficient water pressure, power failure, or phase absence), and mishandling will not cause damage to  machine.

IV.Furnace Features: 1) 1,600 centigrade 2) SCR static frequency conversion adopted as IF power supply for induction heating3) Pouring action driven mechanically or oil hydraulic4) High efficiency, little noise, easy operation and maintenance5) Usage: Refining ferrous metals, smelting nonferrous and precious metals, such as Cu and  Al

We have rich experience in the metallurgy equipment industry for more than 15 years. We also can match the auxiliary equipment for the induction furnace, like: transformer, cooling tower, charging car etc.Welcome to contact us when you need full set of furnace drawings. 

8T Electric Induction Furnace

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.