Ads by Google
1. Pressure clamp connectors2. Dynamic heating up 3. Wide voltage range4. Temperature limiting 5. Energy saving 6. Clip fixing7. Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.
Technical Data
| Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
| Heating element | PTC resistor, self regulating and temperature limiting |
| Heater body | extruded aluminium profile, anodised |
| Connection | 3 pressure clamps for stranded wire 0.5-1.5mm2 (with wire end ferrule) and rigid wire 0.5-2.5mm2 |
| Connection casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 50022 |
| Fitting position | vertical |
| Operating / Storage temperature | -45 to +70°C (-49 to +158°F) |
| Protection type / Protection class | IP20 / I (earthed) |
| Accessories | Screw fixing.Art.No.09024.0-00(1 packing unit=2 piecs) |
| Art.No. | Heating capacity* | Inrush current max. | Lengty (L) | Weight (approx.) |
| 14000.0-00 | 15W | 1.5A | 65mm | 0.30kg |
| 14001.0-00 | 30W | 3.0A | 65mm | 0.30kg |
| 14003.0-00 | 45W | 3.5A | 65mm | 0.30kg |
| 14005.0-00 | 60W | 2.5A | 140mm | 0.40kg |
| 14006.0-00 | 75W | 4.0A | 140mm | 0.50kg |
| 14007.0-00 | 100W | 4.5A | 140mm | 0.50kg |
| 14008.0-00 | 150W | 9.0A | 220mm | 0.70kg |
HG140 Heater (CE Certification) Heating Controller