Ads by Google
Characteristics:
1. Fast heating with a coefficient of heat conductivity of only 1W/m.k. Due to its small thermal capacity, prompt turn on/off can be achieved.
2. High thermal efficiency: The temperature of electric heating film itself is only tens of centidegrees higher than that of the liquid when heating, which is 2-3 times energy saving than ordinary electric stoves.
3. Water, acid and alkali resistance, high-strength of electric insulation.
4. High mechanical strength with 100kg/cm² mechanical pressure.
5. Small size: Small space occupied when applying this heating product.
6. Easy application: Its self-insulation and free-of-open-fire property greatly help simplify the techniques of heat preservation and thermal insulation.
7. Its wide range of temperature,-60°C~250°C, can not be simply achieved by other electrical appliances.
8. Long service time: Under normal use, the product almost can be permanently and continuously used because nickel and chrome materials are durable to any corrosion, and the silastic has a high surface resistance up to 100kg/cm², which is uncomparable for any other electric heaters.
9. Made in any size, the temperature of the product can be precisely adjusted by temperature controller.
Technical parameters :
| Stangard | High Temperature | |
Continuous temperature | 150.00°C | 250.00°C | |
The maximun temperature | 250.00°C | 280.00°C | |
Dimensions | Maximum | 500.00mmx5000.00mm | |
Minimum | 25.00mmx25.00mm | ||
Thickness | 1.50mm | ||
Wire length | Stangard 200.00mm | ||
Technical Data:
1. Temperature range: -40.00~250.00°C
2. Electric resistance precision: ±10%( bigger value selected)
3. Power density: 0.10~1.50w/cm²
4. Mechanical pressure: 100.00kg/cm²
5. Minimum bending radius: 3.20mm
Application:
1. Industrial equipment, pipelines, barrels, tanks, etc.
2. Outdoors telecommunication equipment
3. Medical equipment and devices
4. Outdoors electronic devices
5.Thermal imaging of imaging equipment
6. Case protection under cold and moist environment
7. Industrial ovens and thermal processing equipment
8. Ventilator supports
9. Laminating equipment
10. Vessels
Silicon rubber electric heating plate produced by the company is extremely thin, light and flexible. And the heater with the silicon rubber electric heating plate can transfer heat to any required place. In processing, it can improve heat transfer, accelerate temperature rising and reduce power need. Glass fiber-reinforced silicon rubber can ensure the heater to be stable in dimension, without losing flexibility.
(1) Design according to actual shape and dimension, and ayour equipment.
(2) Moisture-proof chemical defense silicon rubber material makes the service life of heater much longer.
(3) It can be simply pasted or attached to your component by vulcanizing, adhesive or fastener, etc.
Application
(1) Freezing and compression prevention for various instruments and devices.
(2) Medical equipment such as blood analyzer, test tube heater.
(3) Computer auxiliary equipment, such as laser printer.
(4) Vulcanized surface of plastic film.
Temperature VS. Time
This picture shows the surface temperature of a silicon rubber heater when the heater does no be insulated and be suspended in static air at a temperature of 20 DEG C. The data is obtained on the basis of taking a 1.4mm thick standard structure as reference. Note: It can be customized according to the required voltage, power and specifications of customers,
Specification;End surface plate is simply treated with moisture protection, and can not be used after putting in water or frosting place at a long time.
Technical Data
Rated Power | W | Lead Length | 200mm |
Rated voltage | 12V—380V | Wire tension | 15N×15N |
Maximum size | 1000m—1200m | Minimum size | 20mm×20mm |
Ambient Temperature | --60-----250°C | Highest temperature | 250°C |
Maximum thickness | 1.5mm—4mm | Withstand voltage | 1.5KV |
Insulation resistance | ≥5MΩ | Size deviation | ±0.5percent |
Power deviation | ±5percent | Wire Type | Silicone braided wire |
flexible silicone heater