long life; CE certified; with thermocouple(type J or K); High Density; Taper Cartridge heater for mould; Easy take out;

Cartridge Heater         

GIMIDO Cartridge heater Features & Benefits:

        1.Resistor core assembly is accurately and consistently spaced close to the outer sheath for efficient heat transfer.            2.Initial heater diameter is reduced, thus increasing the density of the assembly, resulting in a heating source which exhibits exceptional dielectric strength and heat transfer characteristics.           3.End disc is always welded in place, preventing contaminants from entering the heater. GIMIDO Cartridge heater Technical Specification:     1.Wattage Tolerance: +5%, -10%       2.Resistance tolerance: +10%, -5%       3.Voltages available: 380V,240V, 220V,110V,36V,24V or 12V       4.Max operating temp: 870oC(1600F)       5.Length tolerance: ± 2% or 3.2mm (1/8”), whichever is greater.       6.Camber tolerance: 1.7mm per meter (0.020” per foot).       7.Diameter tolerance: Diameter at each end may vary +0.05mm -0.1mm (+.002" -.004")       8.Standard Unheated Area: 5-10mm;       9.Delivery time: 7-14 working days.However, many sizes are kept in stock. Please contact the factory for assistance.     10.Internal thermocouple: type J or K;     11.Thermocouple Location: Disc End, Sheath, Center of Heater;     12.Insulation resistance (cold): ≥ 50 MΩ;     13.Maximum leakage current (cold): ≤ 0.5 mA; Applications:    1.Medical: Dialysis, Sterilization, Blood Analyzer,Nebulizer,  Blood/Fluid Warmer, Temperature Therapy      2.Telecommunications: Deicing, Enclosure Heater      3.Transportation: Oil/Block Heater, Aircraft Coffee Pot Heaters,      4. Food Service: Steamers, Dish Washers,      5. Industrial: Packaging Equipment, Hole Punches, Hot Stamp. 

                                              

cartridge heater coil