Introduction:

BS01 combustible gas transmitter is suitable for gas detection in Refineries, Chemical plant, LPG station, Gas Boiler, and Spray-Paints etc where gas leakage easily, It can transfer the gas concentration in Air to electronic signal output420mA and transmit with three-core cable, people could check the detection results from the gas monitor far away the locale. This detector adopt our catalytic gas sensor, which has the good reproducibility and hard disturbed by Temperature and Humidity, easy operation etc.  

2. Specifications

Detection principleCatalytic sensor

  Target gasNatural gas (CH4), LPGButanepropaneCoal gasH2Pentane, AlkyneAlkene etc, and liquid steam such as alcohol, Acetone, Toluene, gasoline; 

  Sample manner   Natural diffusion

Detection range0100%LEL

Accuracy±3%LEL

  Response time:     ≤30s

Tem:             -4070   

Relative Hum     95%

Explosion Proof   Ex dCT6

Power            DC24V±25%

Power Consumption  2W/pc

Cable: ≥1.5mm2×3outer diamter for cable is between 6mm9mm

Transmit distance  ≤1000m

Weight: about 1200g

Pressure Limit  86kPa106kPa

Fixed gas detector for combustible gas detection