LED DC Adapter Power Supply Waterproof IP67 LED driver with UL/ CUL E319205
SPECIFICATION LPS IP67
MODEL | HMT-6-12 | ||
OUTPUT | DC VOLTAGE | 12 V | |
RATED CURRENT | 0.5 A | ||
CURRENT RANGE | 0 ~ 0.5 A | ||
RATED POWER | 6W | ||
RIPPLE&NOISE(max.) | 120mVp-p | ||
VOLTAGE TOLERANCE | ±5.0% | ||
LINE REGULATION | ±1.0% | ||
LOAD REGULATION | ±6.0% | ||
INPUT | VOLTAGE RANGE | 90 ~ 264VAC | |
FREQUENCY RANGE | 47 ~ 63Hz | ||
EFFICIENCY (Typ.) | 80% | ||
AC CURRENT | 0.127A/110VAC 0.079A/220VAC | ||
INRUSH CURRENT(max.) | COLD STAR 10A/115VAC 20A/230VAC | ||
LEAKAGE CURRENT | 0.27mA /240VAC | ||
PROTEC- TION | OVERLOAD | RANGE | 110~150% |
MODE | Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 110 ~ 150% rated output power | ||
ENVIRON-MENT | WORKING TEMP. | -30~+70%(Refer to output load derating curve) | |
WORKING HUMIDITY | 20~90% RH-nondensing | ||
SHORAGETEMP,HUMIDITY | -40~+80°C, 10~95% RH | ||
TEMP.CONEFFICIENT | ±0.03%/°C(0~50°C) | ||
VIBRATION | 10~500Hz, 2G 10min./1 cycle, period for 60min. each long X, Y, Z axes. | ||
SAFETY & EMC | SAFETY STANDARDS | UL60950 1310 Class 2, CAN/CSA C22.2 No.222-M91, IP67 approved, Design refer to TUV EN61347-2-13 | |
WITHSTAND VOLTAGE | I/P-O/P:3KVAC | ||
ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25°C / 70% RH | ||
EMI CONDITION & RADIATION | Compliance to EN55022(CISPR22)Class B | ||
HARMONIC CURRENT | Compliance to EN61000-3-2,-3 | ||
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A | ||
OTHERS | MTBF | 732Khrs min. MIL-HDBK-217F (25°C) | |
DIMENSION | 54*32.6*32mm (L*W*H) | ||
PACKING | 0.057Kg/pc | ||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the derating curve for more details. 5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
LED DC Adapter