Ads by Google
low voltage xlpe insulation SWA armoured cable
Description
Type | Description | No. of cores | Nominal cross section of conductor |
YJV32 | Copper conductor/XLPE insulation/Steel Wire Armoured/PVC outer sheath Power Cable | 1, 2, 3, 4, 3+1, 5, 4+1, 3+2 | 1.5~800mm2 |
YJV33 | Copper conductor/XLPE insulation/Steel Wire Armoured/PE outer sheath Power Cable | 1, 2, 3, 4, 3+1, 5, 4+1, 3+2 | 1.5~800mm2 |
ZA-YJV32 ZB-YJV32 ZC-YJV32 | Copper conductor/XLPE insulation/Steel Wire Armoured flame-retardant Power Cable | 1, 2, 3, 4, 3+1, 5, 4+1, 3+2 | 1.5~800mm2 |
WDZA-YJY33 WDZB-YJY33 WDZC-YJY33 | Copper conductor/XLPE insulation/Steel Wire Armoured Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable | 1, 2, 3, 4, 3+1, 5, 4+1, 3+2 | 1.5~800mm2 |
NH-YJV32 | Copper conductor/XLPE insulation/Steel Wire Armoured fire-resistant Power Cable | 1, 2, 3, 4, 3+1, 5, 4+1, 3+2 | 1.5~800mm2 |
Operating CharacteristicsRated voltage: 0.6/1(1.2)kVMax. permissible continuous operating temperature of conductor: 90 °CMax. temperature of conductor during short-circuit (5s max. duration) shall not exceed: 250 °CThe ambient temperature under installation should not be lower than: 0 °CThe bending radius of cable is recommended as following:For single core cable: not less than 15 times of the diameter of cableFor multi-core cable: not less than 12 times of the diameter of cableWhen the armoured single core cable used for Alternative Current(AC) system, the armour material should be non-magnetic.
ApplicationThe cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid in high fall area, able to bear external mechanical force, and certain pulling force.
Manufacturing StandardsGB/T 12706-2008, IEC 60502-1
low voltage xlpe insulation SWA armoured cable