Ads by Google
1. Small size
2. Default temperature settings
3. Easy to install
4. High switching tolerance
Tamper-proof (Pre-set) Thermostat FTO 011Contact breaker / NC (red casing) for regulating heaters or for switching signal devices whentemperature has fallen below the minimum value. The contact opens when temperature is rising.
Tamper-proof (Pre-set) Thermostat FTS 011Contact maker / NO (blue casing) for regulating filter fans, heat exchangers, cooling devices orfor switching signal devices when temperature limit has been exceeded. The contact closes whentemperature is rising.
Technical Data
Sensor element | thermostatic bimetal |
Contact type | snap-action contact |
Service life | > 100,000 cycles |
Max. switching capacity | 250VAC, 5 (1.6) A |
120VAC, 10 (2) A | |
30WDC | |
Max. inrush current | 16AC for 10 sec. |
Connection | 2-pole terminal for 2.5mm², torque 0.8Nm max. |
Mounting | clip for 35mm DIN rail, EN 60715 |
Casing | plastic according to UL94 V-0, light grey |
Dimensions | 47 x 33 x 33mm |
Weight | approx. 30g |
Fitting position | variable |
Operating / Storage temperature | -40 to +80°C (-40 to +176°F) / -45 to +80°C (-49 to +176°F) |
Operating / Storage humidity | max. 90% RH (non-condensing) |
Protection type | IP20 |
Approvals | CE |
Art. No. | Contact | Switch-off temperature | Switch-on temperature |
01160.0-00 | Contact breaker (NC) | +15°C / +59°F (± 5K tolerance) | +5°C / +41°F (± 5K tolerance) |
01160.0-01 | Contact breaker (NC) | +25°C / +77°F (± 5K tolerance) | +15°C / +59°F (± 5K tolerance) |
Switch-on temperature | Switch-off temperature | ||
01161.0-00 | Contact maker (NO) | +50°C / +122°F (± 6K tolerance) | +40°C / +104°F (± 7K tolerance) |
01161.0-01 | Contact maker (NO) | +60°C / +140°F (± 6K tolerance) | +50°C / +122°F (± 7K tolerance) |
01161.0-02 | Contact maker (NO) | +35°C / +95°F (± 6K tolerance) | +25°C / +77°F (± 7K tolerance) |
Thermotat FTS 011 (CE Certification)-Termperature Controller-Industrial Thermostat