GC In-line moisture trap 1.Customized design is OK 2.Withstand voltage 3.High quality

GC In-line moisture trap1.Customized design is OK2.withstand voltage3.High quality

 

GC In-line moisture trap

 

Indicating water traps, stainless water traps, stainless CO traps, stainless hydrogen traps, stainless halogen traps, stainless sulphur traps, stainless hydrocarbon traps and stainless CO2 traps.

All the trap joints can be customized as metric sizes and inch sizes.

JY-4  GC In-line moisture trap 

Specification: Φ40 mm×280 mm, M8×1 Φ3.2 joint.

 

Specific requirements for joints can be met with customization, please provide details if necessary.

 

The maximum inlet gas pressure is 0.5 Mpa, and the maximum flow rate is 5L/min.

Water content in carriers and samples can be removed at room temperature.

 

Stainless Steel Purifiers:

 

Items	Codes	Gas Removed	Operating Temperature	Residual Content
Stainless Steel Oxygen Trap	JSH-1	O2, H2O, CO2	RT	O2 ≤ 0.01 ppm
Stainless Steel Dewatering Trap	JSH-2	H2O	RT	H2O ≤ 0.1ppm
Stainless Steel CO Trap	JSH-3	CO, CH, H2	90~150°C	CO ≤ 0.1 ppm
Stainless Steel Hydrogen Trap	JSH-4	H2, CO, CH4	150~200°C	H2 ≤ 0.1ppm
Stainless Steel Halogen Trap	JSH-5	Halides	RT	Halides ≤ 1ppm
Stainless Steel Sulphur Trap	JSH-6	Sulfides	RT	Sulfides ≤ 1ppm
Stainless Steel Hydrocarbon Trap	JSH-7	H2, CO, CH4	350~400°C	CmHn ≤ 0.1ppm
Stainless Steel CO2 Trap	JSH-8	H2O, CO2	RT	CO2 ≤ 0.1ppm

 

1.Specification: Φ30 mm×280 mm, M8×1 Φ3.2 joint.Specific requirements for joints can be met with customization, please provide details if necessary.

 

2.The maximum inlet gas pressure is 0.5 Mpa, and the maximum flow rate is 5L/min.

 

3.Stainless purifiers are pressure-resistant and temperature-resistant, so you can choose different traps for your specific equipments.

 

4.Residual content of target gases is normally 0.1 ppm at room temperature. If equiped with a generating furnace which provides a high operating temperature, the impurities content can be below 0.01 ppm. Improving the concentrations of gas sources and samples is also an option if high purity is desired.

 

Replete is a manufacturer that also customizes fittings of your specific requirements.

In-line moisture trap