Characteristics and applicationTemperature classification is B. Higher electric and mechanical properties. Used as spacer, processed products and insulating structural parts for electric machine, apparatus equipment and transformer.
StandardQ/XB3136-2008
Table 2Technical requirements
No | Property | Unit | Normal Value | ||
1 |
Flexural strength perpendicular to layer | At room temperature | MPa | ≥230 | |
150±2 | |||||
2 | Impact strength parallel to layer (Charpy method) | kJ/m2 | ≥30 | ||
3 | Electric strength,perpendicular to the layerat 90±2 oil. | MV/m | Refer to table 3 | ||
4 | Breakdown voltage, perpendicular to layer direction. | kV | ≥28 | ||
5 | Dielectric constant | Under 48Hz62Hz |
| ≤5.5 | |
under1Hz |
|
| |||
6 | Dissipation factor | Under 48Hz62 Hz |
| ≤0.04 | |
Under 1MHz. |
|
| |||
7 | Insulation resistance after immersing in water. | W | ≥5.0×108 | ||
8 | Density | g/cm3 | ≥1.8 | ||
9 | Water absorption | % | Refer to table 4 | ||
Table 3 Electrical strength perpendicular to layer direction
Mean thickness mm | Normal Value Unit: MV/m |
1.0 | ≥14.2 |
1.2 | ≥13.7 |
1.4 | ≥13.2 |
1.6 | ≥12.7 |
1.8 | ≥12.2 |
2.0 | ≥11.8 |
2.2 | ≥11.4 |
2.4 | ≥11.1 |
2.5 | ≥10.9 |
2.6 | ≥10.8 |
2.8 | ≥10.5 |
Above 3.0 | ≥10.2 |
Table 4Water absorption
Mean thickness Mm | Normal Value Unitmg |
| Mean thickness Mm | Normal Value Unitmg |
|
0.4 |
| 5 | ≤25 | ||
0.5 |
| 6 | ≤27 | ||
0.6 |
| 8 | ≤31 | ||
0.8 |
| 10 | ≤34 | ||
1.0 |
| 12 | ≤38 | ||
1.2 |
| 14 | ≤41 | ||
1.6 | ≤19 | 16 | ≤46 | ||
2.0 | ≤20 | 20 | ≤52 | ||
2.5 | ≤21 | 25 | ≤61 | ||
3 | ≤22 | Processed by one side to 22.5 | ≤73 | ||
4 | ≤23 |
|
|
Epoxy glass fabric laminated sheet