Extremely expeditious availability Thermal insulation material decrease cost Exact temperture control Process acc. to custom Thermal insulation material description

FRATHERNITTM DN is made from chopped Glass-Fibre, filler  and  temperature-resistant Resin.

FRATHERNITTM DN is developed as a material with cost-performance ratio and can be used up to 200°C.

Technical Data for thermal insulation material

Properties	Test Standard	Unit
Density	DIN 53479	g/cm3	1.80
Flexural Strength                      at 23°C	DIN 53452	N/mm2	140
Compressive Strength            at 23°C                                                      at 200°C	DIN 53454	N/mm2	330 120
Coeff. of Thermal Expansion	DIN 53752	10-6 K-1	18
Thermal Conductivity	DIN 52612	W/mK	0.18
Continuous Application Temperature	-	°C	200
Maximum Application Temperature	-	°C	210
Water Absorption       after 24 h at 23°C	DIN 53495	%	0.3

Availability

FRATHERNITTM DN  can be delivered as sheet cut-offs and finished parts.

Max. sheet dimension      1000 x 2000          mm

Thickness                            3 - 50                     mm

Solutions for thermal insulation material Protection

>Standardized dimensions

>Insulation boards to drawing

>Hot runner insulations

>External surface insulations

 Characteristics thermal insulation material

>Economical components

>Easy machining to shape

>Pricese tool matchup

>High temperature resistance

>Compressive and structural strength

>Low compression set

>Good chemical resistance

>Moisture resistance

>Good insulation values

>Long service life

Technical parameter

Location

Thermal insulation material for plastic injection mould