Silicone rubber tube sleeve: 1-30mm 1KV-7KV 180-200 degree Surface smooth, fiberglass sleeve and silicone rubber

Black 2715 Silicone rubber tube sleeve

Silicone rubber tube sleeve is woven with non-alkali fiberglass yarn, and then coated with silicon rubber under the high temperature.

Silicone rubber tube sleeve owns resistance, superior elasticity, cold endurance and antiaging properties, can be used for the insulating protection of motor and electrical equipments with higher request.

Silicone rubber tube sleeves Generic properties:

1 Fiberglass sleeve color: original color is straw yellow, other colors is also available according to request.

2 Fiberglass sleeve outer appearance: the surface is smooth, without defects that maybe affect the properties of the products.

Technoloty Data of Silicone rubber tube sleeve

No.	Properties	Unit	Values
1	Flexural strength perpendicular to laminations	MPa	≥340
2	Impact strength parallel to laminations (Charpy)	KJ/m²	≥33
3	Insulation resistance after immersion in water	Ω	≥5.0x108
4	Dielectric strength perpendicular to laminations	MV/m	41.2
5	Breakdown voltage parallel to laminations	kv	40
6	Permittivity (50HZ)	/	5.5
7	Dissipation Factor (50HZ)	/	0.04
8	Water Absorption (D-24/23, 1.6mm in thickness)	mg	≤19
9	Density	g/m³	1.7-1.9

Black 2715 Silicone rubber tube sleeve