Our medium wall heat shrinkable tube have a good quality with good glue coating , good quality and lower price is our pursuit.
PERFORMANCE:
TEST ITEM | TEST METHOD | TEST VALUE | | TENSILE STRENGTH | ASTM D638 | ≥20Mpa | | ELONGATION | ASTM D638 | ≥500% | | LONGITUDINAL SHRINK RATIO | ASTM D2671 | ±5% | | DIELECTRIC STRENGTH | ASTM D149 | ≥25kv/mm | | VOLUME RESISTIVITY | ASTM D257 | 1014Ω.cm | | WATER ABSORPTION | ASTM D570 | ≤0.2% | | DENSITY | ASTM D792 | 1.22g/cm3 | | ECCENTRICITY | ASTM D792 | 30% | | FULLY RECOVERY TEMPERATURE RADIO | ASTM D792 | 130±5°C |
|
TECHNICAL&USED:
Product from heat-shrink and low-melting polymer adhesive layer.
Product heating, melting outer shrink, the inner layer, so that is protective seal charged body, the integration of insulated.
Main use: minor caliber pipe, stainless steel and other hard objects outside coating, reinforcement, such as acoustic tube, concrete connection buried pipes, corrosion-resistant and waterproof.
Installation: the materials supplied by 5CM lap, heating guns from one end to the other end of the uniform baking, to shrink after the inner layer at the Sol along the cascade, uniform effuse cooling after the self-contained.
ORDER GUIDE :
Subscription products indicate the color, size, length, unspecified by company factory packaging standards, the company provides the service, press the trim 0.03 Yuan/m trim costs calculation, trim way uses the computer micro-cutting technology.
Product color: black, other colours required customization.
TECHNICAL SPECIFICATIONS:
PRODUCT CODE(mm) | BEFORE SHRINK | AFTER SHRINK | m/roll | ID(mm) | THICKNESS(mm) | ID(mm) | THICKNESS(mm) | | MWPC | MWPC-Ø30/8 | 30+1 | 1.0+0.1 | 8.0-1 | 2.4±0.1 | 1~1.22m/pc | | MWPC-Ø30/12 | 30+1 | 1.0+0.1 | 12.0-1 | 2.0±0.1 | 1~1.22m/pc | | MWPC-Ø35/14 | 35+1 | 1.0+0.1 | 14.0-1 | 2.0±0.1 | 1~1.22m/pc | | MWPC-Ø40/16 | 40+1 | 1.0+0.1 | 16.0-1 | 2.0±0.1 | 1~1.22m/pc | | MWPC-Ø50/20 | 50+1 | 1.0+0.1 | 20.0-1 | 2.2±0.1 | 1~1.22m/pc | | MWPC-Ø65/25 | 65+1 | 1.0+0.1 | 25.0-1 | 2.2±0.1 | 1~1.22m/pc | | MWPC-Ø75/30 | 75+1 | 1.0+0.1 | 30.0-1 | 2.2±0.1 | 1~1.22m/pc | | MWPC-Ø85/35 | 85+1 | 1.0+0.1 | 35.0-1 | 2.2±0.1 | 1~1.22m/pc | | MWPC-Ø95/40 | 95+1 | 1.0+0.1 | 40.0-1 | 2.3±0.1 | 1~1.22m/pc | | MWPC-Ø100/45 | 100+1 | 1.1+0.1 | 45.0-1 | 2.3±0.1 | 1~1.22m/pc | | MWPC-Ø120/50 | 120+1 | 1.1+0.1 | 50.0-1 | 2.4±0.1 | 1~1.22m/pc | | MWPC-Ø150/60 | 150+1 | 1.1+0.1 | 60.0-1 | 2.5±0.1 | 1~1.22m/pc | | MWPC-Ø160/60 | 160+1 | 1.1+0.1 | 60.0-1 | 2.7±0.1 | 1~1.22m/pc | | MWPC-Ø180/60 | 180+1 | 1.1+0.1 | 60.0-1 | 3.0±0.1 | 1~1.22m/pc | | MWPC-Ø200/60 | 200+1 | 1.1+0.1 | 60.0-1 | 3.3±0.1 | 1~1.22m/pc |
|
Medium wall heat shrinkable tubing with coating
