Welcome to ECVERY
Aluminum Foil-Scrim-Kraft Tape
Aluminum Foil-Scrim-Kraft Tape
Supplier Info
[China Supplier]
Contact Person : Mr. Qiang Yu
Tel : 86-574-87161651
Fax : 86-574-87161629
Product Detail
Cut Roll: 48/50mm(2")/60/63mm(2.5")/72/75mm(3")/96mm/100mm(4") Log Roll: 1200mm x 45/50m Jumbo Roll:1200mm x 750m/800m

Specifications:

FEATURES

1.3-way Foil-Scrim-Kraft backing provides excellent reflection of both heat and light.

2.High quality adhesive with quper strong adhesion and holding power offers reliable and 

durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application.

3.Low moisture vapor transmission rate makes it an excellent vapor barrier.

4.Service Temperature range from -30~ +80°C( -22~ +176°F)

TYPICAL PHYSICAL PROPERTIES

PROPERTIES

METRIC

ENGLISH

TEST METHOD

Backing Thickness

120 Micron

4.8Mil

PSTC-133/ASTM D 3652

Total Thickness

170 Micron

6.8Mil

PSTC-133/ASTM D 3652

Adhesion to Steel

25 N/25mm

90 Oz./In.

PSTC-101/ASTM D 3330

Tack Rolling Ball

15cm

6.0In.

PSTC-6/ASTM D 3121

Tensile Strength 

120 N/25mm

27.3Lb/In

PSTC-131/ASTM D 3759

Elongation

%

1.0

PSTC-131/ASTM D 3759

Service Temperature

 -30~ +80°C

-22~ +176°F

--------

Applying Temperature

 +10 ~ 40°C

+50~ +105°F

--------

TYPICAL APPLICATIONS: 

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass 

blanket/duct board joints and seams;joining and sealing flexible air duct seams 

and connections.May also be used for other industrial uses requiring a tape with 

these characteristics and benefits.

PRODUCT FORM & SIZE AVAILABLE

Cut Roll: 48/50mm(2")/60/63mm(2.5")/72/75mm(3")/96mm/100mm(4")

Log Roll: 1200mm x 45/50m

Jumbo Roll:1200mm x 750m/800m

IMPORTANT NOTE:

1.The data above are typical values only,and should not be used for specifications purpose.

2.Tolerance:Weight and Thickness:±10%;Width:±3mm;Length:Long Roil:±0.3m,Jumbo Roll ±0.5%.

STORAGE & SHELF LIFE: 

12 months when stored at 21°C(70°F)/50% relative humidity out of direct sunlight.

SURFACE PREPARATION: 

It is eaaential,as with all pressure-sensitive tapes,that the surface to which the tape

is applied must be clean,dry,free of grease,oil or other contaminants.

PRODUCT USE:

It is essential that the user evaluate our product to determine whether it is fit for 

a particular purpose and user's method of application.Good results will be obtained when 

applied to a clean,dry surface with a suitable pressure on our products between +10 ~ +40°C(+50~+105°F)

  

Aluminum Foil-Scrim-Kraft Tape

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.