Welcome to ECVERY
Brazing and soldering paste (ArChine Adramic Paste 6040)
Brazing and soldering paste (ArChine Adramic Paste 6040)
Supplier Info
[China Supplier]
Contact Person : Ms. Li Lydia
Tel : 86-21-64705533
Fax : 86-21-64513957
Product Detail
1,Prevents seizing and cold welding 2, Prevents brake noise 3, Non-toxic 3,Operating temperature range -30 ~ +1400

ArChine Adramic Paste 6040

Description    

ArChine Adramic Paste 6040 is a fully synthetic, metal-free universal paste

which has been formulated for the most demanding applications. The combination

of a fully synthetic base oil, a mature additive technology and super fine boron nitride powder have produced a high-performance paste for universal use.

Properties                

- Prevents seizing and cold welding

- Prevents stick-slip behavior even for high surface pressures

- Very stable in the presence of hot and cold water as well as most acids and alkalis

- Does not attack any known sealing materials

- High temperature protection with rotating and sliding component in various kind of industrial furnace

- Very high load-carrying capacity

- Prevents brake noise

- Non-toxic

Technical Data          

 

Color

Gray white

Basis

Anti-oxidation and high temp synthetic oil

Thickener

Inorganic thickeners

Operatingtemperature range

approx. -30°C~1400 °C

Base oil viscosity 40 °C

approx. 280 mm2/s

Main solid lubricant

Boron Nitride

Application    

ArChine Adramic Paste 6040 Used for lubricating all types of high-load sliding

surfaces. Used especially for low slide speeds and/or oscillating movements and for

screw, plug-in and bayonet connectors made from steel and non-ferrous metals.

Separation of components subject to heat stress, such as internal combustion engines,

turbines and motor vehicle brake systems. Corrosion protection of bolts, pins, studs,

flanges, spindles and bottom pockets in refineries, steel and cement works as well as

shipping and agricultural engineering. And most of high temperature protection of

rotating and sliding in various kind of industrial furnace. Especially in hot melting

drilling facility.

Instructions    

Before treating with ArChine Adramic Paste 6040, all components must be clean

and free from residues, dirt and moisture. Apply to cleaned surfaces using a brush or lint-free cloth. Apply the amount which is appropriate for the application.

 

Brazing and soldering paste (ArChine Adramic Paste 6040)

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.