1) DC12V to AC110-120V 2) Continuous output power: 800W 3) AC output wave form: pure sine wave form 4) Temperature protect

Test conditions: 1) Operating temperature: 23°C±2°C2) Operating relative humidity: 40-90% RH3) Input: DC 12.8VSpecifications (based on test conditions above):1) Max. continuous output power: 800W2) Surge capability peak output power: 1,600W3) DC input static current (no load): ≤1AMP4) DC input over load current: ≤80-95AMP5) AC output wave form: pure sine wave6) Normal input voltage range: 11-15V7) High voltage cut off level: >15V8) Low voltage alarm: 10.5V±0.5V9) Low voltage cut off level: 10.0V±0.5V10) Output AC voltage (at DC 11-15V input): AC 115V±10% RMS11) Output frequency level: 60±3Hz12) Overload power range: 800W, 5-30% 13) Hi-pot test: PRI/sec, 1,500V/AC 5MA/3s14) Temperature protection: <65°C15) Max.output efficiency: 90%16) AC output short circuit protection: system shut down (no damage)17) Fan run: inner temperature rising up is ≥45°C18) Fault warning: alarm beep19) LED indicator:a) Normal: green b) Fault: red green20) Fuse (spade type): 35A x 3pcs21) Dimensions (L x W x H): 275 x 147 x 73mm22) Environmental condition:a) Operating temperature: 0-40°C b) Operating relative humidity: 10-90% RHc) Storage temperature: -10-50°Cd) Storage relative humidity: 10-95% RH

800W Pure Sine Wave Power Inverter Car Inverter Kit