1,Forging base 2,Welding construction 3,Integraltype cylinder 4,Inner safety valve 5,Double seal in the pump

Main specification:

Rated capacity:30Ton

Min Height: 255mm

Lifting Height: 150mm

Max Height: 405mm

Net Weight: 14.7KG

 1.Welding construction no leak

  2.High strength forged base  3.Piston rod of the integrated heat treated high strength

  4.Double seals in the pump toprevent the oil leak

  5.Inner safety valve prevent the user to adjust the system

Notes:

1)    Do not use over Rated load.

2)    Make sure that nobody is around car when operating jack.

3)    Make sure that the load of the heavy object is placed on the center of jack supporter.

4)    Do not go under the heavy object when operating jack or while the jack is being used.

5)    Fix the jack Stand under the car body for safety.

6)    Do not unscrew the release valve during jack operation.

7)    Do not loosen the release valve more than two turns.

How to use:

1)    Park vehicle at a safe and flat ground surface.

2)    Set the parking brake of the vehicle.

3)    Fix the wheel in the diagonal direction of flat tire with a wooden support.

4)    Position the jack at the right location of car under body.

5)    After closing the release valve, lift the car body up by operating the lever up and down.

6)    When a release valve is slowly release valve is slowly released while holding lever firm after changing tire, it goes down.

Jack