Classical rectangle shape digital LED countdown timer
Packing detail:
*Timer99 minute 59 seconds
*Memory timing
*product sizes: 7.4*6.3*2.0CM
*MEAS 42.5*32.5*31.8CM
*G.W 13.5 KGS
*N.W 12KGS
*MOQ 200pcs
TIMER TIME SETTING
1,Press MIN and SEC button at the same time to reset timer to zero.
2,Press MIN button to advance minute digits(deep sound can behead).
3,Press SEC button to advance minute digits(deep sound can behead).Press and hold SEC button for speed setting.
TIMER START/STOP
1,After time setting is ready,press START/STOP button once and timer will start to count down."M" and "S" marks will flash when timer is running.
2,When timer is counting.press START/STOP button once and timer will stop. "M" and "S" mark will stop flashing and remain on display.
3,Press START/STOP button once and timer will resume counting again.
TIME BUZZER ALARM
1,When timer counts down to 00M and 00S,timer buzzer alarm will sound for 30 seconds.
2,Timer buzzer alarm can be stped by either pressing MIN,SEC or START/STOP buttons.
TIMER MEMORY RECALL
1,After time buzzer alarm stops,press START/STOP button once to recall pre-set timer and timer will count down for another lap.
2,Press START/STOP button secound time can start timer and timer will count down for another lap
BATTERY REPLACEMENT
Follow the arrow direction to open the battery cover at back side of timer.
Remove old battery,insert a new "AAA7" battery as indicated by the polarity symbols(+&-)marked and close battery cover.
CLIP ATTACHMENT
The timer can clip on thin board or shirt pocket,using the plastic clip at rear of timer;The timer can attack to iron or steel surface,using the magnet at rear of timer;The timer can stand on table surface,flip out the metal stand bar at rear of timer
Classical rectangle shape digital LED countdown timer