Welcome to ECVERY
TNMC computerized flat knitting machine
TNMC computerized flat knitting machine
Supplier Info
[China Supplier]
Contact Person : Ms. Jiang Yilian
Tel : 0086-010-83681528
Fax : 0086-010-83682449
Product Detail
Needles:3/5/7/12/14 Knitting Width:52 inch (132cm) Knitting Speed: servo motor driven,24 adjustable speed levels,max in 1.2m/

1.Control system:

10.4'' color LCD touchable panel, all kinds of data are showed on and modification possible trhough touching the screen together with keyboard operation.We provide you U disk to input and output pattern data.The memory on the machine is 64M. It could be extended to 1G,thus large amout of patterns can be stored and selected to knit. The pattern design system is easy handing and used of free, even more upgrading available.

2. Carriage structure:

Due to the aluminum alloy molded carriage, the sluggishness of  carriage during running is rudeced for its small weight, and knitting speed can be substantially increased.The two-arm-structure also improve the reigidity of carriage, provides much more working stability to the machine.

3. Cam system:

The conformation of the cam system is quiet ompact, actions such as knitting, tucking,on knitting, loop delivering, loop taking are all concentrated in one cam system, whithin one system, "knit","tuck", or "no knit" is carried out, and the ioop transferring or taking is independent of carriage direction.

4. Yarn Storage of yarn supplier(option):

Especially suitable to knit yarns with low strength such as worsted yarn, rabbit hair yarn,high count cotton yarn.

5. Neelde plate composed needle bar:

Needle bed composed of needle plates is extremely firm.When needle crash encounted, needle beds could be recovered by changing needle plate instead of replacing the whole bed, hence to minimize the economic lose.

6. Mian roller:

Stepping  motor controlled 32 seletable levels, each level has a range of 0~99 to be adjusted. Copperating with sinkers, full-fashioned garment could be knitted.

7. knitting system:

Double cam system, single carriage (for 5/7/12/14 needle)

single cam system for 3.5/3 needle

8. Knitting Function

i can realize manifold knitting methods, such as "knif","tuck","no knit" and "loop transfer" etc. Due to the Three-way-technique it could finish "knit","tuck" or "no knit" in one can system.

9. racking

Servo motor driven, man 2-inch racking in left or right, 1/2,1/4,3/4 pitch also avaliable from any position, and slight error can be compensated by fine-tuning function.With two cam systems,loops can be simultaneously transferred to front or rear bed, independent of carriage direction.

10. sinker system

Moveable revolving sinkers on both neede beds make the bulge fabric and full fashioned fabric knittable on the machine, even without any old loop(add, minus needle)

11. sitch density

Stepping motor driven,24 selectable levels, the stitch cam can be adjusted within 5mm

12. needle selection

Eight level full jacquard selection via special solenoid actuators.

13. Yarn Carrier

Eight yarn carrier can be dropped off at any position of carrier rail according to program setting

14. Take up Device

Main roller , moment motor controlled, 24 selectable levels, each level has a range of 0~99 to be adjusted sub roller cooperate with sinkersto knit full-fashioned garment.

15. yarn storate or yarn supplier(option)

Especially suitable to knit yarns with low strength such as worsted yarn,rabbit hair yarn, high count cotton yarn

16. Power-off Protection

Correct continuation of knitting process after power failure without any waste pieces

17. Drive System

Belt-driven,AC servo motor driven without limits

18. Stop Motion

All necessary devices to stop the machine and give an alarm in case of yarn break,large knot, needle break,fabric press-off, wraparound check, needle smash, racking error ,program error, and pieces count etc. Small knot cause several courses at lower speed

19. Security devices

Full darity safely cover for noise-suppression and dust-proofing with warning marks

20. Machine Status Lamp

Green (normal operation),yellow (normal stop), red(abnormal stop)

21. control system

10.4'' color LCD panels, all kinds of data are shown on and modification possible through it.We provide you two ways to input pattern data,3.5'' floppy disk and U disk. The memory on the machine is 32M, max goes to 1G, and large amount of patterns can be stored and selected to knit, the pattern design system is easy-handing and used far free, even more upgrading allowable

22. Power

3 phase AC 380V, or single phase 220V, 50HZ

23. Power Efficiency

About 1.8KW

TNMC computerized flat knitting machine

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.