XDJX09-A Semi jacquard needle transfer collar knitting machine :
1. Machine knitting Width: 52inch
2. Machine Number (needle pitch): 7G, 9G ,12G, 14G, 16G
3. Weaving Speed: Variable-frequency speed control, arbitrary adjustment, the maximum is 1.2 m / sec.
4. Power Requirements: AC220V ± 8% 50HZ /60HZ
5. Drive Motor Power: 550W
6. Needlebar Travel Distance: 3 needle pitchs on the left and right, and the maximum sliding distance is up to 6 needle pitches.
7. Density Regulation: step motor 150-grade trimming, eight sets of stitches
8. Knitting Needle Category: Steel leather low kind knitting needles; lower section high and low types of pins
9. Transmission mode: synchronous belt reciprocating motion, any adjustment of woven spans
10 Control Modes: controlled by computer procedures and liquid crystal display
11. Overall Dimension: 52 ": 2300X850X1620
12. Machine Weight: 52": 420KGS
Main characteristic :
This machine is controlled by computer program, which can be used to automatically knit simple sweaters and clothing attachments with such materials like cotton, hemp real silk ,wool, polyester fiber, blended spinning and so on.
This machine has the automatic function as follows:
changing yarns with six colors, adjusting the fabric tension, controlling tuck and work of high-butt needle and Low-butt needle, transposition of needle bed, batching-up and draw-off, piece counting, automatic stop for coarse knot and ending out etc .The knitting speed can be randomly adjusted according to the different materials and the different knitting width. The traverse motion of timing belt is as a driving way, so the back and forward motion of frame head can be adjusted according to the width of fabric. You can knit square, straight, vertical, interlock fabric, wool loom-state fabric and some other regular jacquard fabrics according to the different arrangement of the needles
Needle Transfer Computerized Collar Knitting Machine