Specification of Computerized flat knitting machine
The steel needles are inserted on the bed. Replaceable segment can be available when broken down.
Variable stroke. Max 52” (132mm)
3-5-7 multi-guage,3, 5, 7, 9, 10, 12, 14/per inch
Knitting speed varies according to gauge and knitting condition. Max.1.2m/sec., 24 speed selection programmable command control.
One carriage with double system setup
Composite design, use three ways technology. Each system can perform loop + doubling stitch +not knitting at the same time.
Compound knitting cam system, each system can transfer from the front to rear, rear to front or both front and rear simultaneously without direction restriction. Auto racking and auto receive.
Each system setting is controlled by a step motor. It has 24 stitches of independent selections and each of them ranges from 00-365 steps for knitting pattern.
Each system has 4 sets special solenoids. Double cam system equipped totally 8 sets solenoids, which can be installed or removed simply from the carriage and maintained easily.
2*8 sets yarn carriers on 4 double side rails, switchable in any area within the knitting width. Also can be equipped with special design yarn carrier for intarsia pattern (optional device)
This system composed by two additional pieces of sinker needle bed. The sinker presser degree adjustable the positions by knitting program command.
Servo motor control, the programmable racking position within 2 inches, each also having 1/4, 1/2 and 3/4 micro adjustable positions.
Main take down roller
24 levels changeable tensions, adjustable automatically on each level.
Sub take down roller
24 levels changeable tensions, adjustable automatically on each level. Automatically open and close.
Carriage drive system
AC servo motor, tooth shape dricing belt, no oil needed. 24 speed selection and freely programmable.
Yarn breaking, knot, press off, needle break, over current, roll back, wrong racking, inappropriate position of presser, excessive yarn, and reaching on production target offer automatic stop.
Built-in controller. Data input by hand or USB memory disc. Stored program for flat knitting machine.
1024X4096 hung memory for the width and pattern length design.
USB memory interface
CTR indication English and Chinese are standard version. Supplement with other languages (optional software)
3 phase AC 220V 1.2KVA
Dimension & Weight
Length X width X height: 2790X1100X1500mm
Net weight : 1280kg
Cable, pick-up holes, transfer, flat narrowing, single-faced jacquard with or without dotted-line stitch, double faced jacquard (max 6 colors in one row) , engraved pattern, and intarsia stitches and so on.
Knitting, tucking float, transfer or composition, system supports three kinds of the transferring: front transfer to rear, rear transfer to front, or transfer each other.
Picaso design software
flat knitting machine