“Cixing” brand GE90 computerized seamless underwear knitting machine provides two 16-section selectors for each feed. With natural fiber, synthetic fiber, artificial fiber, bare urethane elastic fiber and wrap yarn, this machine can be used to produce seamless single-side clothes, such as underwear, outwear, swimwear, sportswear and medical-wear. If required, it can be also used to produce towel products or add towel weave on products.
Supporting servo motor as main motor under position control mode; supporting SMART64 intelligent input serial interface of BTSR for detailed information obtaining; CAN interface reserved for connection with peripheral equipment; supporting 26-route alarming input signals.
By “Cixing” professional charting software, the program can be modified through machine computer and PC program composition.
10.4″colors screen (800x600) with language of Chinese and English interface.
Diameter of spinning can
From 12″ to17″
From 16G to 32G
8 feeds for any diameter
13”machine with max. speed of 100 RPM(depending on production conditions, diameters and actual speed))
Each feed equipped with 2 actuators of Class 16, enabling 3-service positions for needle selection
Each feed with 6 main Yarn feeders, including 2 dyed Yarn feeders and additional 2 Yarn feeders without floating color to realize multiple colors jacquard pattern.
Binder for bare covered urethane elastic fiber or wrap yarn
8 feeds, each feed has 2 yarn binders
Yarn gripper and cutter
The dial rise or fall is controlled by stepping motor and cutter's height can be automatically adjusted according to technological requirements while knitting jacquard weaves or double-layer waistband
Suction with independent or centralized exhauster system to realize the automatic pulling force of fabric, the machine comes with a torsional device to improve the flat surface evenness of fabric.
Stitch density control
A stepping motor for the stitch density control of each feed, allowing quick loosing or tightening on coil size and 3D function
1 optical serial sensor per Yarn feeder, each feed has 6 optical sensors.
The creel stand behind of machine set up yarns by pneumatic control.
Automatic and independent lubrication for needles, jacks and sinkers, and lubrication for cycle use
Plaiting pattern function
Having special clear effect of plaiting pattern function.
Using yarn gripper and cutter for the knitting of single or many rubber lined double layer waistband fabric
With terry kit it is possible to have terry insertions produced in any parts of seamless articles.
Supporting working site protection under sudden grid power down. Automatic detection of grid voltage, automatic stop and shutdown of power.
CIXING seamless underwear knitting machine