Structural Beam Material: Poplar ,Eucalyptus Size: Length 2440mm,3950mm Width 50~1000mm Thickness 25~120mm Glue: MR WBP

Laminated Veneer Lumber ;

Building / Structural LVL Beam ; Packaging LVL

Scaffolding Board

Fumigation Free

 

(Samples Are Available )

 

Laminated Veneer Lumber

        Laminated veneer lumber (LVL) is a structural product manufactured from thin rotary peeled veneers of wood usually 3mm thick, glued with a durable adhesive with the grain running parallel to the main axis of the member.

 

       These panels have excellent bending resistance, tension and compression properties and greater load-bearing capacity than traditional materials.

Material: poplar  or eucalyptusSizes:Benefits        Reduced twisting, warping and splitting, makes LVL easy to build with, providing time and cost savings.   Length: 2,440, 3,950mmWidth: 50 to 1,220mmThickness: 25 to 100, 42/44,Regular Size : 2,440 x 1,220 x 25/42/44mGlue: MR, E2, E1,WBPMinimum order quantity: one  40ft HC

         LVL can be used for horizontal and vertical solutions, providing a dimensional precision which gives architects greater design possibilities.                Good for long spans, with minimal deflection, LVL is ideal for roof/floor joists and lintel/framework studs, both in new build and renovation, where strength is needed. The timber that LVL is manufactured from comes from sustainably managed forests.

         Specification         • Available in a wide range of sizes         • With a grain that runs longitudinally through the veneer layers, LVL is specially kiln dried to 10-15% moisture content

 Uses: for all kinds of fumigation-free packaging ; formwork ;Construction beams, rafters and columns for wide range of buiding structurals .                    

  LVL is often used to complement the use of sawn timber in domestic construction.

  In commercial or industrial structures it is often used as a wood-based alternative to structural steel or reinforced concrete.

 Generally LVL is chosen when sawn timber is not strong enough to support the structural, or longer lengths are needed.

Packaging Material for mechanical Eequipment

Quality standard:Even thickness, no unglued and no bubble, on the faceThe color should be consistentNo glues passing through, no worm boreNo mildew and no crackCan be jointed or repaired in the backStatic bending strength: ≥50MPaModulus of elasticity: ≥7,000MPa

Laminated Veneer Lumber ( LVL Beam )