Welcome to ECVERY
40w co2 laser engraving power supply
40w co2 laser engraving power supply
Supplier Info
[China Supplier]
Contact Person : Ms. Xie Kathy
Tel : 086-021-61729052
Fax : 086-021-39190705
Product Detail
40w laser power supply 40w laser engraving power supply 40w laser machine parts 40w laser power supply with 40w laser tube

ShangHai ZhaoGuang 40w co2 laser engraving power supply

1. Main Features:

1) High output voltage and current: when inputting AC220V and outputting current up to 38MA, the voltage can be up to 25KV.

2) Response time: ≤1Ms from the time that switch Signal is given to the output current up to 90% of the setting current

3) Increase the power of laser: Used with 2000mm laser, the peak of laser power can be up to 130W and the average power is 100W.

4) Dramatically lengthen the life of laser.

5) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.

6) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.

7) The power supply possesses open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.

8) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.

9) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.

10) Application: thick acrylic cut, fabric cut, etc.

2. Specification:

Input

 

Input Voltage

AC220V or AC110V(Please specify when placing order)

AC Frequency

47---440Hz

Max Input power

350W

Max Output current

3A

Output

Max Output voltage

DC 25KV

Max Output current

DC 20 mA

Efficiency

≥90%(Full load)

MTBF

≥10000 Hours

Response time

≤1mS (Time from the TTL Signal is given to the output current up to 90% pre-setting current)

Withstand Voltage

Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure.

Weight

2.0KG

Environment

Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90%

Cooling

Force-Air Cooling (FAC)

Dimesition

L×W×H=167*144*91 (mm)

40w co2 laser engraving power supply

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.