Welcome to ECVERY
100w 3d laser deep engraving machine
100w 3d laser deep engraving machine
Supplier Info
[China Supplier]
Contact Person : Ms. Chan Cassy
Tel : 0086-27-87801910
Fax : 0086-27-87802353
Product Detail
It is to meet the requirement of deep engraving for metal surface in vehicle, mechanics, electronics, metallurgy, petrol machine


Key components are all imported from overseas, such as acousto-optic, Q-switch, lamp pump etc. Good quality of the system has been assured.Both long purls duration/high average power model and short duration/high peak power model.Based on the same electricity consumption, peak power from the machine is up to 300Kw, which is more than 10 times higher than traditional flash lamp-pumped solid-state lasers.Good beam quality & high energy conversion efficiency.Up to 0.08mm depth during single marking and maximum marking depth is more than 5mm.Pulse frequency control model, repeat frequency is 30KHz.Can be used for metal sheet drilling, minimum aperture width is 0.15mm.Engraving speed: 10 seconds/mm(die steel)Can do 3D engraving

Technical Parameters

ModelCTDB-SD 100W
Laser Power100W
Laser Wavelength1064nm
Max laser head Up/Down50 cm
Standard Marking Area110mmX110mm
Adjust Marking Area75mmX75mm /150mmX150mm
Marking Depth≤5mm(accrording to materals)
Marking Linear Speed≤7000mm/s
Minimum Linear Width0.015mm
Minimum Character0.3mm
Repeat Positioning Acuuracy±0.01mm
Max Peak power of laser300 W
Operating Voltage220V//50Hz/15A
Machinery Packing Size1100*1000*1200mm
Chiller Packing Size650*550*950mm

Applicable industries

It is suitable for vehicle parts, hardware, stainless steel materials, watches and clocks, jewelry m industrial bearings, molds and so on.  Especially for deep engraving on copper, aluminum, stainless steel and other metal material surface.

100w 3d laser deep engraving machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.