MARS90 vinyl cutters and printers from Thunderlaser can be used to cutting or engraving many kinds of materials such as wood, acrylic, leather, glass into different patterns.
1.WORKABLE MATERIALS
Wood, Acrylic, Glass, CoatedMetals, Ceramic, Delrin, Cloth, Leather, Marble, Plastic, Pressboad, Matte board, Paper, Rubber, Melamine, Fiberglaa, Wood, Veneer, Cork, Tile, Ceramics, Corian, Painted Metals, Tainless Steel, Titanium, Brass, Anodized A luminum
Almost all non-metal materials, and some metallic, can be engraved and/or cut by using a Thunder Laser System. Below is a selection of them. (See notation for metals)
Engrave | Cut | |
Wood | √ | √ |
Acrylic | √ | √ |
Delrin | √ | √ |
Cloth | √ | √ |
Leather | √ | √ |
Mat Board | √ | √ |
Melamine | √ | √ |
Paper | √ | √ |
Mylar | √ | √ |
Pressboard | √ | √ |
Rubber | √ | √ |
Wood Veneer | √ | √ |
Fiberglass | √ | √ |
Plastic | √ | √ |
Cork | √ | √ |
Corian | √ | √ |
Twill | √ | √ |
Anodized Aluminum | √ | |
Painted Metals | √ | |
Tile | √ | |
Glass | √ | |
Coated Metals | √ | |
Ceramics | √ | |
Marble | √ | |
Stainless Steel | * | |
Brass | * | |
Titanium | * | |
Bare Metal | * |
*‘if you need to mark on bare metal directly, please contact us for more information.
2.SPECIFICATION
Laser Tube Wattage | 60-120Watt |
Laser Type | Sealed CO2 Glass Laser Tube |
Cooling | Water Cooled |
Work Area | 900x600(35.4"x23.6") |
(Max Part Size) Front door closed | 1000x730x270mm(39.4"x28.7"x10.6") |
(Max Part Size) Pass-through door | 1000x∞x30mm(39.4“x∞"x1.2") |
Table Size | 1000x730mm(39.4"x28.7") |
Z Axis Height | 265mm(10.4") |
Dimensions(WxDxH) | 1500x1100x1060mm(59.0"x43.3"x41.7") |
Motion Control System | High-Speed Micro Stepper Motors |
Maximum Speed | 600mm/s(23.6IPS) |
Speed and Power Control (engraving depth) | Computer or manually controlled speed and power from0-100%. Vector color mappingsets speed and power settings using RGB color mapping. |
Operating Modes | Optimized raster, vector, and combined mode |
Resolution(DPI) | User controlled from 100 to 500DPI (standard laser head), up to 1000DPI(HR head) |
Computer Interface | USB port |
Compatible Operating Systems | Windows XP/2000/Vista/7 |
Buffer Memory | 64MB Standard |
Display Panel | 3"LCD panel showing current file, total working time, laser power, speed etc. |
Net Weight | 220kgs(485lbs) |
Electrical Requirements | 110 to 240 volts, 50 or 60 Hz, single phase |
Ventilation System | Intergral exhaust fan. There is 1 output port, 5.7" (145mm) in diameter in the rear of the case. |
Standerd Features | Red dot pointer, Auto focus, Motorized table Pass-through Door, Air Assist, Water pump, Exhaust fan, HoneyComb Table, 2"(50.8mm) Focus lens, Easily adjustable Home position, LCD Display, 3D Engraving, "No water" protection, Emergency stop, Open cover protection |
Optional Features | |
High Resolution Head | Increases the resolution up to 1000DPI |
Rotary Axis | Used to engrave on round items |
Water Chiller | Improves the cooling of the laser tube |
3.STANDARD ACCESSORIES1×Air Pump(installed inside the machine) for Air Assist (for blowing off debris as the laser engrave or cut) 1×Exhaust(installed inside the machine) with Tube ducts ( for extracting gases from the work area) 1×Water pump 1×USB Cable (connecting PC and laser) 1×DVD (Including software, User manual, Guiding videos etc.) 1×Power Cable 1×Tool box
4.Standard features
1.Visible Red Dot PointerMake the laser beam "visible" 2.Emergency stopTurn off the machine immediately when there is an accident 3.Motorized tableControl the table up/down from LCD panel directly 4.Open flap protectionLaser will stop working if you open the front cover 5.Mirror mountEasily re-adjusting 3D mirror mounts 6.LCD panelSet speed, power, and more directly from the LCD panel. 7.Color mappingChange the working speeds and power by using color settings. 8.Water protectionLaser will stop working if the water cooling system is not working 9.High quality railsKeep the engraving/cutting precise and very durable 10.Honey comb tableAllows the laser beam to pass through the material you are cutting and reduces underside reflections. 11.Engrave 3DEngrave high quality 3D photos directly 12.Auto focusHelp the user to set the focus Easier. (based on motorized table) AFTER-SALE SERVICEIf you meet a problem or have any questions about the machine, please feel free to contact us. Our engineer will help you to solve the problem as soon as possible.
5.samples
6.Video(Guiding Video and Demo Video)
for more video.please visit www.thunderlaser.com/video.html
for more information,please visit our website www.thunderlaser.com
CO2 laser vinyl cutters and printers supplies