1.80W plastic laser tube 2.120x90cm work area 3.Taiwan PMI square linear 4.Lifting platform 5 configure a chilling machine SIWEI laser engraving machine: 1.Optimization of mechanical a nd electrical design,processing speed can be up to 2000mm/s2.Configure higher power laser tube,can cut acrylic of 20mm thickness in one step;3.Full upgrading to operation off line and to support USB flash disk output.Rich function can effectively engrave on flat surface,gradient engraving by 360 degree;4.Transmit files directly from CorelDraw and AutoCAD,ETC.5.Configure lens from USA, to ensure perfect cutting;6.Adopt international linear rail of XY axis to guarantee more precise operation7.Configure with a chilling machine Technical data 

Model	SW6040	SW6090	SW1290
Engraving	600*400mm	600*900mm	1200*900mm
Power	40W-50W	60W-70W	100W
Resolution	less than0.025mm
Setting Accuracy	0.1mm
Repetition Accuracy	less than 0.1mm
Max.cutting speed	200mm/sec
Max.engraving speed	2000mm/sec
Min.size of engraved letters	Chinese Letter Engraving1.5mm, Cutting3mm, English Letters Engraving0.8mm, Cutting2mm
Max.cutting thickness	more than 10mm for Acrylic	more than 15mm for Acrylic	more than 20mm for Acrylic
Dictate Format	HPGL(transmit files directly from Coreldraw,AutoCAD

 Optional configuration: Panasonix servo system;rotary device; lifting platform 

SIWEI SW1290 Laser Engraving Machine