Optical Mould Fiber Welding Machine adopts advanced technical know how from Germany to weld the mould and mechanical parts

Mould YAG Laser Welder

It adopted British ceramic condenser cavity, high reflectivity, strong power, long service life. Equipped with high power chilling machine, which can meet the requirement of long time working and high power welding.

 

Small welding spot size , small heat-affected zone, applicable for small and precise geometric area;no bubble and trachoma produced, directly grinding, polishing and wrinkle treatment after welding. No substrate deformation and collapse, no strength decreases and cracking after welding.

 

The base of worktable uses electric lift for up and down movement. The moving unit of worktable is equipped with precise ball bearing bar and linear lead rail. It is lightweight and flexible with precise positioning.

 

Field of application

Welding on precision injection, die-casting, mold repairing, metal ornament and accessories, stamping parts, lost wax casting, aluminum casting, sand hole repairing on stainless steel etc

Mould YAG Laser Welder Specification

Equipment Type	GD-MYW150/200/300
Laser output power	150/200/300W
Laser wavelength	1064nm
Min spot diameter	0.2mm
Min welding pool	0.1mm
Pulse width	0.1ms-20ms
Pulse frequency	1-50Hz
Control system	microcontroller
Observation system	Microscope
Target positioning	CCD
Table travel	300 × 200 × 300mm
Host system	1170 × 580 × 1100mm
Electricity requirement	220v 60Hz

                              

Mould laser welder