Ads by Google
FEATURES:
Large spindle bore of 65mm Main spindle dynamic balanced, and supported at 2 points with taper roller bearings of Harbin brand Outward appearance featuring large plains, making the machine more good-looking Gapped bedways, which are super-audio frequency hardened
All gears hardened and ground by Reishauer grinding machine Leadscrew and feedrod interlocked, both with overload protection Automatic feed stopper Configuration variable totally according to orders:Metric or inch system; right or left hand wheel; large plane type; halogen lamp; quick change tool past; DRO; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system.
MAIN SPECIFICATIONS
MODEL
| CD6136BWCD6236BW | CD6140BWCD6240BW | CD6145BWCD6245BW | CD6150BWCD6250BW | CD6160BWCD6260BW | |
CAPACITIES | Max. swing over bed (mm) | 360(14″) | 400(16″) | 450(18″) | 500(20″) | 600(24″) |
Max. swing over cross slide(mm) | 185(7'/4") | 225(9") | 285(11'/4") | 325mm(13") | 360(14″) | |
Center distance (mm) | 1500 | |||||
Center high (mm) | 250 | |||||
Max swing in gap (mm) | 490(20″) | 530(21″) | 580(23″) | 630(25″) | 730(29″) | |
Valid length of gap | 260mm (10′/4″) | |||||
Bed width | 330mm(13″) | |||||
HEADSTOCK
| Spindle hole | 65mm(23/5″) | ||||
Spindle nose | ISO-C6 or ISO-D6 | |||||
Spindle taper | Metric 70mm | |||||
Spindle speeds (Number) | 22-2000rpm (15 steps) | |||||
FEEDS | Metric threads range (Kinds) | 0.5-28mm (66kinds) | ||||
Inch Threads range (Kinds) | 1-56 tpi (66kinds) | |||||
Module threads range (Kinds) | 0.5-3.5mm (33kinds) | |||||
Diametral threads range (Kinds) | 8-56 tpi (33kins) | |||||
Diametral threads range (Kinds) | 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds) | |||||
Cross feeds range (Kinds) | 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds) | |||||
Rapid traveling speed of carriage | 5m/min (16.4ft/min) | |||||
Leadscrew size: Diameter/Pitch | 35mm/6mm(1/4″) | |||||
CARRIAGE | Cross slide travel | 300mm (13″) | ||||
Compound rest travel | 130mm(5″) | |||||
Cross-section size of toolshank | 20*20mm | 25*20mm/(1*6/8inch) | 25*25mm | |||
TAILSTOCK | Taper of tailstock sleeve | Morse No.5 | ||||
Diameter of tailstock sleeve | 65mm(23/5″) | |||||
Travel of tailstock sleeve | 120mm(43/4″) | |||||
MOTOR | Main drive motor | 4.0kw or 5.5kw or 7.5kw | 7.5kw | |||
Coolant pump motor | 0.125kw | |||||
Rapid traverse moter | 0.12kw | |||||
Packing Size (L*W*H) (mm) | ||||||
1500mm | 2920*1150*1800(15*46*7lin.) | |||||
CD6260BW Lathe machine