HTS 320 CNC Lathe\Lathe\machine tool , cost-effective and excellent CNC lathe, is researched and produced independently by our company according to market demands. HTS320 can be widely used for batch machining of disk, sleeve, short shafts, internal and external thread, cone and spherical work piece. The characteristics of the machine are as followings:1. The machine is structured with 30°slant bed, wide support guide way and full close appearance design, which has high rigidity, reasonable dynamic, good guard and smooth chip removal.2. Bed, bed seat, spindle boxes and drag board are all apply the precision casting, finite element analysis and reasonable rib collocation, which improve the anti-vibration performance. 3. The machine is applied the modularization design. Not only the standard manual collet + gang type tool post, other different clamping configuration can be chosen according to different customer requirements, such as: hydraulic or pneumatic collet, hydraulic or manual chuck, different tool post type: gang type tool post + electrical turret or turret; different tail stock type: manual, pneumatic or hydraulic. 4. The resist type centralized lubrication system is applied in the machine.
Items | Contents | Unit | Specification |
General capacity | Max.swing diam. over bed | mm | φ320 |
Max.swing diam. over drag board | mm | φ160 | |
Max. workpiece diam. (disk parts) | mm | φ320 | |
Max.length of workpiece | mm | 320 | |
Min. travel of center sleeve | mm | 100 | |
Max.diam.of through-hole | mm | φ49 | |
Spindle | Spindle nose |
| A2-5 |
Spindle speed | r / min | 500~1800/ | |
9002500 | |||
Clamp type |
| Standardcollet | |
Optionalautomatic collet /6chuck | |||
Motor | Main motor power | kW | Standard4kWoptional5.5kW |
X/Z motor torque | Nm | 6with brake/6 | |
Feeding | /max. travel | mm | 300/320 |
/Max. travel speed | mm / min | 8000 /10000 | |
Turret | Turret type and positions |
| Standardgang type tool post |
Optional: 4-p turret or 4-p turret + gang type tool post | |||
Tool shaft section | mm | 20×20 | |
Max. diam of boring tool shank | mm | φ25 | |
Tail stock(Optional) | Diam. of tailstock sleeve | mm | φ45 |
Max. travel of tailstock body | mm | 150 | |
Max. travel of tailstock sleeve | mm | 80NC controlled hydraulic or pneumatic tail stock | |
Cone of tailstock sleeve | MT | MT3# | |
Others | Net weight | kg | 1600 |
Overall dimensionL×W×H | mm | 1820×1410×1580 |
HTS 320 Lathe