The machine can also carry out the slot-cutting, cutting-off, drilling, countersinking, reaming and other machining.

FeaturesBy using the traditional single column and fixed beam NC vertical lathe layout mode, the machine can complete the interior and exterior cylindrical surface, interior and exteriro tapered surface, plane and curved surface machining. The machine can also carry out the slot-cutting, cutting-off, drilling, countersinking, reaming and other machining.It uses the electrical position-rotating tool carrier.Main motor uses the straight-teeth gear transmission. The spindle bearings use the introduced precision bearings and use the grease for lubrication.The cylinder controls the high and low speed changeover mode.X and Z axes use the cast iron hardened and tape covered guide-way set.The servomotors drive the ball lead-screws via one step of synchronous teeth belt decelerator.Main big components use the closely reinforced layout so that they are good in anti-vibration, high in whole machine rigidity.There are many functions, such as: man machine dialogue, Chinese and English language changeover, trace display, trouble self diagnosis, automatic alarming, and with floppy driving input.The machine is reliable in its running, stable in the accuracy. The machine possesses the excellent cost performance.Main specifications

Model		Unit	SSCKL40
Chuck diameter		mm	Ø314
Max. swing diameter		mm	Ø500
Max. machining diameter		mm	Ø400
Max. machiningx part hight		mm	280
Spindle speed		r/min	1001600
Max. travel of X-axis		mm	470
Max. travel of Z-axis		mm	290
No. of tool positions			Gang tools 6
Max. rapid traverse: X-axis		m/min	18
Max. rapid traverse: Z-axis		m/min	10
X-axis servo motor		Nm	11
Z-axis servo motor		Nm	11
Spindle motor		KW	18.5/22
Positioning accuracy	X-axis	mm	+ 0.035
	Z-axis	mm	+ 0.040
Repeatability	X-axis	mm	0.0075
	Z-axis	mm	0.015

CNC Vertical Lathe