Welcome to ECVERY
Ruizhou Dual-head CNC Leather Cutter
Ruizhou Dual-head CNC Leather Cutter
Supplier Info
[China Supplier]
Contact Person : Mr. Cao Tony
Tel : 86-0757-86778345
Fax : 86-0757-86785920
Product Detail
Two cutting heads Three work area:nest,cut&collect simultaneously Auto feeding Good for big production,cut 800/1000 pairs/day

Ruizhou Dual-head CNC Leather Cutter  

Ruizhou Dual-head CNC Leather Cutter combines three work areas in one cutter, capable of nesting, cutting & collecting simutaneously. The conveyror belt further optimizes the work flow by the auto-feeding function. With it, you can cut the materials continuously from nesting to collecting. 

The dual cutting heads double the cutting speed. That is a cutter can cut in high speed, high precision without interference and confliction.



1. CNC control system: it digitalizes the cutting processes, so frees you from moulds and dies, saving you lots of money. It also enlarges your products lines. You can design more complicated and exquisite patterns.



2.  Smart nesting in section: for large skin or synthetic materials in rolls, the cutter has a new nesting function of dividing the whole piece of material into sections, allowing you to nest continuously and inter-sectionally. The converyor belt transports the nested section to the cutting area. The cutting system is able to recognizethe sectional area to cut. In this way, it successfully avoids the waste of material which is caused by the limited nesting space of the table surface for large skin material and practically enhances the utilization rate of material by 5%.


Cutting Effects:



3. Dual cutting heads work in opposite direction: It applies a multi-task operation system which makes the each cutting heads run in its own path without any confliction. It allows two separated tool heads cutting on difference with nesting and cutting process, thus enables the machine running on-stop.


4. Non-interference collecting:  the rolling table surface makes collecting easy and quick, without causing any interfrence with nesting and cutting process, thus enables the machine running non-stop.  


5. High productivity: With two cutting tools working at the same time, the productivity is increased by over one fold compared with normal flatbed leather cutter. It is able to reach a daily production of between 800-1000 pairs of shoes and completely meets the demand of massive production.


6. Fast cutting: It adopts a hanging-arm abd sliding-rail design, which minimizes the rub and resistance force against the tool heads and enables the tool heads running smoothly and quickly and the running speed of each tool head is increased by 100% in conrast to normal flatbed leather cutter.


7. Practical solution: It combines nesting, cutting and collecting functions, no need to use an extra nesting machine or feeding roller, which makes operation simpler more convenient and more practical.


8. Saving time, material and space: Dual high-speed tool heads remarkably increases productivity, and interactive nesting between the operator and the cutter enhances the utilization rate of material. In addition, the compact design of the machine body takes a lot less space.


Technical parametersModel No.RZCUT-1530-2H
 1Characteristicsynchronic operation between computer and cutter, rapid data transmission which can be accessed to continuously
 2 Cutting speed 0-1200mm/s*2
 3 Cutting thickness 0.1-4.0MM
 4Cutting materials natural leather, artificial leather, cardboard, plastic board, complex materials, fiber sheet etc.
 5 Cutting tool rotating/ vibrating knife cutting tool, punching tool, pressing tool
 6 Optional pen type ordinary signing pen, oil pen, ball pen, silver pen
 7 Suction method vacuum suction based on cell
 8 Machine resolution 0.07mm
 9 Software resolution 0.025MM/0.01MM/0.1MM
 10 Transmission Interface standard serial interface/parallel port/ net port
 11 Control system Ruizhou CNC Leather Cutting System
 12 Command system Language of HP-GL and GP-GL
 13 Control panel touch control LCD display
 14 Motor servo motor
 15 working area 1500*1000mm*3
 16 Setup dimension 3140*2450*2340mm
 17Host working voltage AC 220V +/-10%, 50HZ
 18 Vacuum pump working voltage AC 380V +/- 10%, 50HZ
 19Vibrating knife tool the motor of vibrating knife tool takes 12000-20000 rotate/min

Ruizhou Dual-head CNC Leather Cutter

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.