Welcome to ECVERY
LINSN Control card LED Receiving Card RV 801Card
LINSN Control card LED Receiving Card RV 801Card
Supplier Info
[China Supplier]
Contact Person : Ms. Hu Maggie
Tel : 86-592-5771197
Fax : 86-592-5771202
Product Detail
Control Card LINSN TS 801 Support max DVI resolution 1280x1024, work with RV 801 & RV 802.

Features:

 Point by point correction, by card (box) correction.

Support for single-point calibration point by point, 2 × 2 , 4 × 4 points and 8 × 8  four calibration mode, the maximum correction of 6144 points / module, red, green and blue of the 256. By card (box) between the correction for the display of the box color correction, red, green and blue of the 256.

Intelligent Identification Function

 Intelligent identification program can recognize color, full color, virtual, lighting and other various boards of various drivers and various scanning signals to identify the rate of 99%, a set of cards in hand, doing screen of mind.

 

65536 (64K) arbitrarily set within the function of gray

Customers can monitor the situation from no gray to 65,536 (64K) adjust the gray, so that you achieve the best display screen.

 

Any refresh rate settings, lock, synchronization.

Refresh rate from 10Hz-3000Hz can be arbitrarily set, the refresh rate lock feature allows the display refresh refresh rate locked in a multiple computer monitors, and to prevent tearing, to ensure perfect image reproduction. Phase-locked synchronization range 47Hz-76Hz.

Double large load area.

 

Full Color 4096 (4K) gray 180Hz refresh rate, the maximum with 512 × 128, is the sixth generation 256 × 128 double, full-color static 16384 (16k) gray 300hz, which can carry 160 × 64 is the sixth generation of 80 × 64 twice. (Note: The board can be driven on the high clock 30MHz)

Hot backup feature dual-network lines

 Receiving cards A, B two-port can be used as input or output port can be used to control two computers while a screen, when a computer fails, another computer automatically takes over, a computer can also be used for dual-network line of control, when a cable problem, the other automatically takes over a network cable, so that the normal work of the greatest screen protection.

 

Multi-screen synchronization and combination of functions.

Send card control with support for a multi-block screen, multi-block-screen status can be any combination of work, synchronous display, independent playback, shortcut keys can be quickly switched.

 

256 automatic brightness adjustment 256 automatic brightness adjustment function lets you adjust the display brightness is more effective.

Program online upgrade function.

 

If the display of the receiving card program to be upgraded, just open the studio big-screen power to upgrade through the LED, no need to split away from the big screen receiving card can be upgraded.

 Break through the traditional concept of non-code switch.

 No DIP switch design, all of the settings through the computer settings.

Test function:

Receiving card integrated test functions, then do not send cards to the test screen, slash, gray, red, green, blue, full brightness, and other test mode.

 

Long distance

Transmission maximum of 170 meters (measured), ensure the transmission 140 meters.

Supporting software

LED Studio 10.0

 

LINSN Control card LED Receiving Card RV 801Card

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.