IntroductionThe thermostat is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected set point. ApplicationFor the control of warm-water( floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings... FeaturesOn/off control output for heating device Symbol indicator when heating is onTemperature limitation function for protecting the wooden floor Current room temperature displaying when the thermostat is switched-off “Key-lock” function for protecting the setted parameters( especially suitable for Public Places) Technical data:Voltage : AC230V(AC110V / AC24V available)Load : 3APower consumption : 2WSetting range : 4°C~45°C(factory setting: 5°C~35°C)Switching differential : ±0.5KAmbient temperature : -5~50°CProtective housing : IP20Housing material : self-extinguishing PC |